Joe:
Tell me what you need and I'll send it to you.
I was able to get the 3270 emulator to connect after changing the config to
a 3270 display type, the default was linux. There is no response to any
input after this screen.
____________
Hercules Version : 3.07
Host name : KUBED-LAP3
Host OS : Windows_NT-6 2
Host Architecture : AMD64
Processors : MP=4
Chanl Subsys : 0
Device number : 001F
Subchannel : 0004
HHH HHH The S/370, ESA/390 and z/Architecture
HHH HHH Emulator
HHH HHH
HHH HHH EEEE RRR CCC U U L EEEE SSS
HHHHHHHHHHHHHHHH E R R C U U L E S
HHHHHHHHHHHHHHHH EEE RRR C U U L EEE SS
HHHHHHHHHHHHHHHH E R R C U U L E S
HHH HHH EEEE R R CCC UU LLLL EEEE SSS
HHH HHH
HHH HHH
HHH HHH My PC thinks it's a MAINFRAME
Copyright (C) 1999-2010 Roger Bowler, Jan Jaeger, and others
___________
This as far as I get.
The cmd window I run hercules in shows Im connected..
_______
Crypto module loaded (c) Copyright Bernard van der Helm, 2003-2010
+
Active: Message Security Assist
Message Security Assist Extension 1
Message Security Assist Extension 2
HHCCF077I Engine 0 set to type 0 (CP)
HHCCF077I Engine 1 set to type 0 (CP)
HHCCF077I Engine 2 set to type 0 (CP)
HHCCF077I Engine 3 set to type 0 (CP)
HHCCF077I Engine 4 set to type 0 (CP)
HHCCF077I Engine 5 set to type 0 (CP)
HHCCF077I Engine 6 set to type 0 (CP)
HHCCF077I Engine 7 set to type 0 (CP)
HHCHD018I Loadable module directory is C:/Program Files/Hercules/Hercules
3.07 (
HHCCF065I Hercules: tid=00002B40, pid=11832, pgid=11832, priority=0
HHCTE001I Console connection thread started: tid=00003184, pid=11832
HHCTE003I Waiting for console connection on port 3270
HHCTT002I Timer thread started: tid=0000318C, pid=11832, priority=-20
HHCCP002I CPU0000 thread started: tid=00003188, pid=11832, priority=15
HHCCP003I CPU0000 architecture mode ESA/390
HHCPN001I Control panel thread started: tid=00002B40, pid=11832
HHCAO001I Hercules Automatic Operator thread started;
tid=00003194, pri=0, pid=11832
HHCTE009I Client 127.0.0.1 connected to 3270 device 0:001F
Command ==>
CPU0000 PSW=0000000000000000 24M.......
instcount=0
__________
I started with using the default hercules.cfg file with the comment added
to the HTTP and now it looks like what is below after the HercGUI modified
it
______
#
# Hercules Emulator Control file...
#
# Description:
# MaxShutdownSecs: 15
# LoadUnit: 0000
# RCFile:
# LogoFile:
# IgnoreParseErrors: 0
# HercGUI Version: 1.13.0.4238
#
# System parameters
ARCHMODE ESA/390 # (Hercules 3.x)
ALRF DISABLE
MAXCPU 8
ENGINES CP,CP,CP,CP,CP,CP,CP,CP
NUMCPU 1
HERCPRIO 0
TODPRIO -20
DEVPRIO 8
CPUPRIO 15
AUTO_SCSI_MOUNT NO
CNSLPORT 3270
CONKPALV (3,1,10)
CODEPAGE default
CPUMODEL 3090
CPUSERIAL 002623
CPUVERID FD
DEVTMAX 8
DIAG8CMD DISABLE NOECHO
ECPSVM NO
MODPATH "C:/Program Files/Hercules/Hercules 3.07 (64 Bit)/"
LEGACYSENSEID DISABLE
LOADPARM 0120....
LPARNUM 01
LPARNAME HERCULES
MAINSIZE 64
MANUFACTURER HRC
MODEL EMULATOR "" "" ""
MOUNTED_TAPE_REINIT DISALLOW
OSTAILOR LINUX
PANRATE 50
PGMPRDOS RESTRICTED
PLANT ZZ
SHCMDOPT ENABLE DIAG8
SYSEPOCH 1900
TIMERINT 50
TRACEOPT TRADITIONAL
TZOFFSET -0500
XPNDSIZE 0
YROFFSET 0
# Card Readers
000C 3505 ./util/zzsacard.bin
# Card Punches
000D 3525 punch00d.txt ascii
# Line Printers
000E 1403 print00e.txt crlf
# Console Printers
0009 3215-C / noprompt
# Display Terminals
001F 3270
'_________
I'm pretty much stuck at the moment, I was planing to to use the turnkey
system if that will be a faster route. Just need to brush up on my TSO EDIT.
What would you suggest?
Post by Joe Monk ***@gmail.com [hercules-390]TJ,
You'll need much more than that.
What OS are you trying to run? Are you trying to use one of the turnkey
systems or?
You haven't given us very much to help you with.
Joe
Post by ***@gmail.com [hercules-390]Two newby problems.
Hercules installed and starts on pc with sample cfg file ( only had to
comment out the HTTP line ) after star up I get ...
HHCTE003I Waiting for console connection on port 3270
but running powerterm connecting to 127.0.0.1 on port 3270 I get...
Hercules version 3.07 built on Mar 23 2010 01:43:12
running on XXXXXXXX (Windows_NT-6.2 AMD64 MP=4)
Connection rejected, no available 1052 or 3215 device
Second problem.
Can't' seem to create DASD, all the commands are for linux
HurcGUI64 tries and then goes into debug mode.
--
Thanks,
Tony Kanakis