Discussion:
zVM 6.4 on Hercules 3.12 does not start
(too old to reply)
4kuxh35fxopq3xqdwlkejgmkxkzmtxhugc4zo4el@yahoo.com [hercules-390]
2017-03-22 12:57:32 UTC
Permalink
Hi listers,

I have restored a zvm 6.4 runing on a system z to my hercules 3.12. When I start it I get these messages:
A zvm 6.30 starts without problems on the same hercules version and configuration.

09:15:22 z/VM V6 R4.0 SERVICE LEVEL 1601 (64-BIT)
09:15:23 SYSTEM NUCLEUS CREATED ON 2017-03-21 AT 07:00:53, LOADED FROM 640RES
09:15:23
09:15:23 ****************************************************************
09:15:23 * LICENSED MATERIALS - PROPERTY OF IBM* *
09:15:23 * *
09:15:23 * 5741-A07 (C) COPYRIGHT IBM CORP. 1983, 2016. ALL RIGHTS *
09:15:23 * RESERVED. US GOVERNMENT USERS RESTRICTED RIGHTS - USE, *
09:15:23 * DUPLICATION OR DISCLOSURE RESTRICTED BY GSA ADP SCHEDULE *
09:15:23 * CONTRACT WITH IBM CORP. *
09:15:23 * *
09:15:23 * * TRADEMARK OF INTERNATIONAL BUSINESS MACHINES. *
09:15:23 ****************************************************************
09:15:23
09:15:23 HCPZCO6718I Using parm disk 1 on volume 64COM1 (device 0643).
09:15:23 HCPZCO6718I Parm disk resides on cylinders 1 through 120.
09:15:23 Start ((Warm!Force!COLD!CLEAN) (DRain) (DIsable) (NODIRect)
09:15:23 (NOAUTOlog)) or (SHUTDOWN)
09:28:00
09:28:00 NOW 09:28:00 EDT WEDNESDAY 2017-03-22
09:28:00 Change TOD clock (Yes!No)
09:28:02
09:28:02 HCPERP500I DASD 0640 AN OPERATION WAS TERMINATED BECAUSE A
09:28:02 HCPERP500I COMMAND REJECT ERROR OCCURRED
09:28:02 HCPERP6300I SENSE DATA FORMAT = 00 MSG CODE = 01
09:28:02 HCPERP6301I CHANNEL COMMAND WORD COMMAND CODE = N/A HPF
09:28:02 HCPERP6302I SEEK ADDRESS = 000000000000
09:28:02 HCPERP6303I SENSE = 80000000 00FFFF01 00000000 00000000 00000000
09:28:02 HCPERP6303I 00000000 00000080 00000000
09:28:02 HCPERP6304I IRB = 00C24017 1FDDD008 0E400040 00800000
09:28:02 HCPERP6305I USERID = SYSTEM
09:28:02 HCPERP2216I CHANNEL PATH ID = 06
09:28:02 HCPUDS1777E The directory on volume 640RES could not be initialized.
09:28:02 HCPUDS1752E No directory could be initialized.
09:28:02 HCPERP500I DASD 0640 AN OPERATION WAS TERMINATED BECAUSE A
09:28:02 HCPERP500I COMMAND REJECT ERROR OCCURRED
09:28:02 HCPERP6300I SENSE DATA FORMAT = 00 MSG CODE = 01
09:28:02 HCPERP6301I CHANNEL COMMAND WORD COMMAND CODE = N/A HPF
09:28:02 HCPERP6302I SEEK ADDRESS = 000000000000
09:28:02 HCPERP6303I SENSE = 80000000 00FFFF01 00000000 00000000 00000000
09:28:02 HCPERP6303I 00000000 00000080 00000000
09:28:12 HCPWRP959I ZVM6401 SYSTEM TERMINATION IN PROGRESS ON 2017-03-22

I think the HCPERP500I command reject is the relevant msg. Before restoring it from a running system I have tried to install it in second level. The installation ran successfully until the restart before the postload activities. During this ipl there were the same error msgs as above. I first thought it is because of a problem with the installation material. Therefore I installed it with the same installation dvd on a real z and it worked without problems. Then I have done a ddr backup and restored it to my hercules. I got the same error again as with the second level installation. What might be wrong? Does zvm 6.4 do things other during ipl as zvm 6.3?

I tried then to start with hercules 4.00 rc0 (downloaded yesterday) but on this version I cannot get any zvm up and running neither 6.4 nor 6.3. I get the following error

HCPRFI9030W CP REQUIRES HARDWARE FEATURES NOT AVAILABLE ON THIS PROCESSOR.
HHC00809I Processor CP00: disabled wait state 0002000000000000 0000000000009030


Does anybody have an idea on problem 1 (zvm 6.4 on Hercules 3.12) or problem 2 (any zvm on hercules 4.00 RC0)?


I assume that Hercules 4.00 is currently not ready to run zvm. Right?







Here is my hercules config
#
# Hercules Emulator Control file...
# Description: Standalone DDR
# MaxShutdownSecs: 99
#
#
# System parameters
#

CPUSERIAL 004920
CPUMODEL 2965 # CPU model number
MAINSIZE 2048
CNSLPORT 3270
NUMCPU 4
# ARCHMODE ESA/390
ARCHLVL z/ARCH
ARCHLVL ENABLE
ARCHLVL ENABLE PROBSTATE_DIAGF08
ARCHLVL ENABLE VIRTUAL_MACHINE
ARCHLVL ENABLE QDIO_ASSIST
ARCHLVL ENABLE QDIO_TDD
ARCHLVL ENABLE asn_lx_reuse
DIAG8CMD ENABLE
ECPSVM ENABLE
LOADPARM 0A00....
LPARNUM 1
LPARNAME ZVM1
SYSEPOCH 1900
TZOFFSET +0100
OSTAILOR QUIET
PANRATE 1000
PGMPRDOS LICENSED
DEVTMAX 150
# neue Prio-Werte ab Version 3.05
HERCPRIO 0
TODPRIO -20
DEVPRIO 8
CPUPRIO 15
# alte Werte vor offizieller Version 3.05
# HERCPRIO 0
# DEVPRIO -8
# TODPRIO 0
# CPUPRIO 0
# Card Readers

#000C 3505 e:/daten/ipl390/standalone/iplddrxa.rdr ebcdic
#001C 3505 e:/daten/ipl390/standalone/iplickdsf.rdr ebcdic
#002C 3505 e:/daten/ipl390/standalone/iplsalipl.rdr ebcdic

# Line Printers

000E 1403 d:/temp/prt00e.txt crlf

# DASD Devices

#0430 3390 E:/daten/ipl390/dasd/430res.zvm cu=3990 sf=E:/daten/ipl390/dasd/430res_1.zvm
#0431 3390 E:/daten/ipl390/dasd/430w01.zvm cu=3990 sf=E:/daten/ipl390/dasd/430w01_1.zvm
#0432 3390 E:/daten/ipl390/dasd/430w02.zvm cu=3990 sf=E:/daten/ipl390/dasd/430w02_1.zvm
#0433 3390 E:/daten/ipl390/dasd/430w03.zvm cu=3990 sf=E:/daten/ipl390/dasd/430w03_1.zvm
#0440 3390 E:/daten/ipl390/dasd/440res.zvm cu=3990 sf=E:/daten/ipl390/dasd/440res_1.zvm
#0441 3390 E:/daten/ipl390/dasd/440w01.zvm cu=3990 sf=E:/daten/ipl390/dasd/440w01_1.zvm
#0442 3390 E:/daten/ipl390/dasd/440w02.zvm cu=3990 sf=E:/daten/ipl390/dasd/440w02_1.zvm
0600 3390 E:/daten/ipl390/dasd/VSErs1.zvm cu=3990 sf=E:/daten/ipl390/dasd/VSErs1_1.zvm
0601 3390 E:/daten/ipl390/dasd/VSErs2.zvm cu=3990 sf=E:/daten/ipl390/dasd/VSErs2_1.zvm
0602 3390 E:/daten/ipl390/dasd/VSEsys.zvm cu=3990 sf=E:/daten/ipl390/dasd/VSEsys_1.zvm
0603 3390 E:/daten/ipl390/dasd/VSEVSM.zvm cu=3990 sf=E:/daten/ipl390/dasd/VSEVSM_1.zvm
0604 3380 E:/daten/ipl390/dasd/VSE231.zvm cu=3990 sf=E:/daten/ipl390/dasd/VSE231_1.zvm
0605 3380 E:/daten/ipl390/dasd/VSE232.zvm cu=3990 sf=E:/daten/ipl390/dasd/VSE232_1.zvm
0606 3380 E:/daten/ipl390/dasd/VSEDAT.zvm cu=3990 sf=E:/daten/ipl390/dasd/VSEDAT_1.zvm
0607 3390 E:/daten/ipl390/dasd/V31RES.zvm cu=3990 sf=E:/daten/ipl390/dasd/V31RES_1.zvm
0608 3390 E:/daten/ipl390/dasd/V31WK1.zvm cu=3990 sf=E:/daten/ipl390/dasd/V31WK1_1.zvm
0609 3390 E:/daten/ipl390/dasd/V41RSA.zvm cu=3990 sf=E:/daten/ipl390/dasd/V41RSA_1.zvm
060A 3390 E:/daten/ipl390/dasd/V41W1A.zvm cu=3990 sf=E:/daten/ipl390/dasd/V41W1A_1.zvm
060B 3390 E:/daten/ipl390/dasd/VSESY1.zvm cu=3990 sf=E:/daten/ipl390/dasd/VSESY1_1.zvm
060C 3390 E:/daten/ipl390/dasd/VSESY2.zvm cu=3990 sf=E:/daten/ipl390/dasd/VSESY2_1.zvm
060D 3390 E:/daten/ipl390/dasd/VSESY3.zvm cu=3990 sf=E:/daten/ipl390/dasd/VSESY3_1.zvm
060E 3390 E:/daten/ipl390/dasd/VTAP01.zvm cu=3990 sf=E:/daten/ipl390/dasd/VTAP01_1.zvm
0619 3390 E:/daten/ipl390/dasd/V41RSB.zvm cu=3990 sf=E:/daten/ipl390/dasd/V41RSB_1.zvm
061A 3390 E:/daten/ipl390/dasd/V41W1B.zvm cu=3990 sf=E:/daten/ipl390/dasd/V41W1B_1.zvm
511A 3390 E:/daten/ipl390/dasd/V51RES.zvm cu=3990 sf=E:/daten/ipl390/dasd/V51RES_1.zvm
511B 3390 E:/daten/ipl390/dasd/V51WK1.zvm cu=3990 sf=E:/daten/ipl390/dasd/V51WK1_1.zvm
512A 3390 E:/daten/ipl390/dasd/VSE512.zvm cu=3990 sf=E:/daten/ipl390/dasd/VSE512_1.zvm
0700 3390 E:/daten/ipl390/dasd/zvmadd.zvm cu=3990 sf=E:/daten/ipl390/dasd/zvmadd_1.zvm
0701 3390 E:/daten/ipl390/dasd/cmswk1.zvm cu=3990 sf=E:/daten/ipl390/dasd/cmswk1_1.zvm
0702 3390 E:/daten/ipl390/dasd/BCUSR1.zvm cu=3990 sf=E:/daten/ipl390/dasd/BCUSR1_1.zvm
0703 3390 E:/daten/ipl390/dasd/T33901.zvm cu=3990
0704 3390 E:/daten/ipl390/dasd/cmswk2.zvm cu=3990 sf=E:/daten/ipl390/dasd/cmswk2_1.zvm
0705 3390 E:/daten/ipl390/dasd/cmswk3.zvm cu=3990 sf=E:/daten/ipl390/dasd/cmswk3_1.zvm
0706 3390 E:/daten/ipl390/dasd/BCUSR2.zvm cu=3990 sf=E:/daten/ipl390/dasd/BCUSR2_1.zvm
# VM-Systeme
0530 3390 E:/daten/ipl390/dasd/530res.zvm cu=3990 sf=E:/daten/ipl390/dasd/530res_1.zvm
0531 3390 E:/daten/ipl390/dasd/530pag.zvm cu=3990 sf=E:/daten/ipl390/dasd/530pag_1.zvm
0532 3390 E:/daten/ipl390/dasd/530spl.zvm cu=3990 sf=E:/daten/ipl390/dasd/530spl_1.zvm
0533 3390 E:/daten/ipl390/dasd/530w01.zvm cu=3990 sf=E:/daten/ipl390/dasd/530w01_1.zvm
0540 3390 E:/daten/ipl390/dasd/540res.zvm cu=3990 sf=E:/daten/ipl390/dasd/540res_1.zvm
0541 3390 E:/daten/ipl390/dasd/540pag.zvm cu=3990 sf=E:/daten/ipl390/dasd/540pag_1.zvm
0542 3390 E:/daten/ipl390/dasd/540spl.zvm cu=3990 sf=E:/daten/ipl390/dasd/540spl_1.zvm
0620 3390 E:/daten/ipl390/dasd/m01res.zvm62 cu=3990 sf=E:/daten/ipl390/dasd/m01res_1.zvm62
0621 3390 E:/daten/ipl390/dasd/m01s01.zvm62 cu=3990 sf=E:/daten/ipl390/dasd/m01s01_1.zvm62
0622 3390 E:/daten/ipl390/dasd/m01p01.zvm62 cu=3990 sf=E:/daten/ipl390/dasd/m01p01_1.zvm62
0623 3390 E:/daten/ipl390/dasd/vmcom1.zvm62 cu=3990 sf=E:/daten/ipl390/dasd/vmcom1_1.zvm62
0624 3390 E:/daten/ipl390/dasd/620rl1.zvm62 cu=3990 sf=E:/daten/ipl390/dasd/620rl1_1.zvm62
0630 3390 E:/daten/ipl390/dasd/630res.zvm cu=3990 sf=E:/daten/ipl390/dasd/630res_1.zvm
0631 3390 E:/daten/ipl390/dasd/630pg1.zvm cu=3990 sf=E:/daten/ipl390/dasd/630pg1_1.zvm
0632 3390 E:/daten/ipl390/dasd/630sp1.zvm cu=3990 sf=E:/daten/ipl390/dasd/630sp1_1.zvm
0633 3390 E:/daten/ipl390/dasd/630com.zvm cu=3990 sf=E:/daten/ipl390/dasd/630com_1.zvm
0634 3390 E:/daten/ipl390/dasd/630rl1.zvm cu=3990 sf=E:/daten/ipl390/dasd/630rl1_1.zvm
0635 3390 E:/daten/ipl390/dasd/630w01.zvm cu=3990 sf=E:/daten/ipl390/dasd/630w01_1.zvm
0640 3390 E:/daten/ipl390/dasd/640res.zvm cu=3990 sf=E:/daten/ipl390/dasd/640res_1.zvm
0641 3390 E:/daten/ipl390/dasd/640s01.zvm cu=3990 sf=E:/daten/ipl390/dasd/640s01_1.zvm
0642 3390 E:/daten/ipl390/dasd/640p01.zvm cu=3990 sf=E:/daten/ipl390/dasd/640p01_1.zvm
0643 3390 E:/daten/ipl390/dasd/64com1.zvm cu=3990 sf=E:/daten/ipl390/dasd/64com1_1.zvm
0644 3390 E:/daten/ipl390/dasd/640rl1.zvm cu=3990 sf=E:/daten/ipl390/dasd/640rl1_1.zvm
0645 3390 E:/daten/ipl390/dasd/640W01.zvm cu=3990 sf=E:/daten/ipl390/dasd/640W01_1.zvm
FF01 3390 E:/daten/ipl390/dasd/TEMP01.zvm cu=3990 sf=E:/daten/ipl390/dasd/TEMP01_1.zvm
FF02 3390 E:/daten/ipl390/dasd/TEMP02.zvm cu=3990 sf=E:/daten/ipl390/dasd/TEMP02_1.zvm
# Test fÃŒr VSEDASD-Rexx
FF03 3390 E:/daten/ipl390/dasd/TEMP03.zvm cu=3990 sf=E:/daten/ipl390/dasd/TEMP03_1.zvm
# WM SE VSE01 Systemplatten fÃŒr FSU
FF10 3390 E:/daten/ipl390/dasd/WMVS01.zvm cu=3990 sf=E:/daten/ipl390/dasd/WMVS01_1.zvm
FF99 3390 E:/daten/ipl390/dasd/VTAP01.zvmx cu=3990 sf=E:/daten/ipl390/dasd/VTAP01_1.zvmx
*
# Pagespace
3000 3390 e:/daten/ipl390/dasd/BGETM1.zVM cu=3990 sf=e:/daten/ipl390/dasd/BGETM1_1.zvm
3001 3390 e:/daten/ipl390/dasd/BGETM2.zVM cu=3990 sf=e:/daten/ipl390/dasd/BGETM2_1.zvm
# TAPE Devices

0181 3490 *
0182 3490 *
0183 3490 *
0184 3490 *

# 3270 Display

0A00 3270 ZVMCONS
0A01 3270
0A02 3270
0A03 3270
00F0 3270 zos
00F1 3270 zos
00F3 3270 zos
0040 3270 CONSOLE

# Network Connection
# zVM
1000-1001 ctci -k 1024 -i 128 -n 42-00-47-11-08-15 192.168.147.1 0.0.0.0
1002-1003 ctci -n 42-00-47-11-08-15 192.168.147.2 0.0.0.0
1004-1005 ctci -n 42-00-47-11-08-15 192.168.147.3 0.0.0.0
1006-1007 ctci -n 42-00-47-11-08-15 192.168.147.4 0.0.0.0
1008-1009 ctci -n 42-00-47-11-08-15 192.168.147.5 0.0.0.0


Thanks in advance for your help
Franz Josef
crc@alce1.tuttopmi.it [hercules-390]
2017-03-23 11:59:09 UTC
Permalink
Hi Franz,

Answer to question #1
I can run z/VM 6.4 on Hercules 3.12 and even on Hercules 3.11 without any problem.

Answer to question #2

I don't use Hercules 4.0 as I had many problems with the last versions of z/VM and z/OS...

Perhaps it's better to discuss further this matter privately :-)

My mail is

crc*at*alce1.tuttopmi.it ('*at*' stands for '@')

Regards

Paul
dave.g4ugm@gmail.com [hercules-390]
2017-03-23 15:01:47 UTC
Permalink
You don’t need to put your e-mail address into the post. When viewing e-mails its in the bottom of the mail.

On the web site click “reply”, then to the left of the subject there are two “V” signs nested inside one another,

click on that and the header expands to show the “to” field in a drop down box.

There are five options,



1. The Group
2. The sender
3. The sender and the group
4. The Group Owner (moderators)
5. The Group Owner and the sender.



Number 2 allows you to reply to the sender.



Dave





From: hercules-***@yahoogroups.com [mailto:hercules-***@yahoogroups.com]
Sent: 23 March 2017 11:59
To: hercules-***@yahoogroups.com
Subject: [hercules-390] Re: zVM 6.4 on Hercules 3.12 does not start





Hi Franz,

Answer to question #1
I can run z/VM 6.4 on Hercules 3.12 and even on Hercules 3.11 without any problem.

Answer to question #2

I don't use Hercules 4.0 as I had many problems with the last versions of z/VM and z/OS...

Perhaps it's better to discuss further this matter privately :-)

My mail is

crc*at*alce1.tuttopmi.it ('*at*' stands for '@')

Regards

Paul
crc@alce1.tuttopmi.it [hercules-390]
2017-03-23 16:44:08 UTC
Permalink
Thanks,

I'm trying this method with you :-)

Regards

Paul
crc@alce1.tuttopmi.it [hercules-390]
2017-03-23 16:45:52 UTC
Permalink
Post by ***@gmail.com [hercules-390]
You don’t need to put your e-mail address into the post. When viewing e-mails its in the bottom of the mail.
On the web site click “reply”, then to the left of the subject there are two “V” signs nested inside one another,
click on that and the header expands to show the “to” field in a drop down box.
There are five options,

The Group The sender The sender and the group The Group Owner (moderators) The Group Owner and the sender.
Number 2 allows you to reply to the sender.
Post by ***@gmail.com [hercules-390]
Dave
Thanks!


I'm trying this method with you :-)


Paul
Ivan Warren ivan@vmfacility.fr [hercules-390]
2017-03-23 13:21:15 UTC
Permalink
Post by ***@yahoo.com [hercules-390]
HCPRFI9030W CP REQUIRES HARDWARE FEATURES NOT AVAILABLE ON THIS PROCESSOR.
HHC00809I Processor CP00: disabled wait state 0002000000000000
0000000000009030
Franz,

Try "ARCHLVL ENABLE BIT44" under hercules 4.00

--Ivan



[Non-text portions of this message have been removed]
Franz Josef Pohlen fjpohlen-maillist@gmx.de [hercules-390]
2017-03-27 12:26:41 UTC
Permalink
Hello Ivan,

I have tried your recommendation ARCHLVL ENABLE BIT44. The msg
HCPRFI9030W doesn't appear any longer but now after the standalone
loader screen and PF10 there is an X SYSTEM in the emulation window and
suddenly afterwards a PROG708. This means that an SNA msg was received
before the begin of the data transmission. I use Personal Communication
as a console emulation as always and had never problems before.


Any help is welcome.
--
kind regards
Franz Josef Pohlen
Post by ***@alce1.tuttopmi.it [hercules-390]
Post by ***@yahoo.com [hercules-390]
HCPRFI9030W CP REQUIRES HARDWARE FEATURES NOT AVAILABLE ON THIS PROCESSOR.
HHC00809I Processor CP00: disabled wait state 0002000000000000 0000000000009030
Franz,
Try "ARCHLVL ENABLE BIT44" under hercules 4.00
--Ivan
[Non-text portions of this message have been removed]
------------------------------------
------------------------------------
http://groups.yahoo.com/group/hercules-390
http://www.hercules-390.org
------------------------------------
Yahoo Groups Links
------------------------------------

------------------------------------

Community email addresses:
Post message: hercules-***@yahoogroups.com
Subscribe: hercules-390-***@yahoogroups.com
Unsubscribe: hercules-390-***@yahoogroups.com
List owner: hercules-390-***@yahoogroups.com

Files and archives at:
http://groups.yahoo.com/group/hercules-390

Get the latest version of Hercules from:
http://www.hercules-390.org


------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/hercules-390/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/hercules-390/join
(Yahoo! ID required)

<*> To change settings via email:
hercules-390-***@yahoogroups.com
hercules-390-***@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
hercules-390-***@yahoogroups.com

<*> Your use of Yahoo Groups is subject to:
https://info.yahoo.com/legal/us/yahoo/utos/terms/
Franz Josef Pohlen fjpohlen-maillist@gmx.de [hercules-390]
2017-04-21 12:35:17 UTC
Permalink
Hello all,

as the Hercules 4.0 doesn't seem to be working for the current zvm. I
will try to get the zvm 6.4 running with Hercules 3.12 (Win 64Bit). I
get an error during IPL after I have confirmed the time question. It
cancels with command reject on the IPL device. For documentation I have
started a ccw trace on the ipl device and ipled the zvm 6.4 with
cons=sysc. So the zVM messages and the ccw trace is in the log. I hope
that someone of you developers can see there what's going wrong. My old
zvm 6.3 starts without problems on this hercules configuration. I have
also attached my hercules config. There might still be some settings for
Hercules 4.0 but they were ignored during start with Hercules 3.12.

Thanks in advance for your help and have a nice weekend

Franz Josef

Hercules Config

#
# Hercules Emulator Control file...
# Description: Standalone DDR
# MaxShutdownSecs: 99
#
#
# System parameters
#

CPUSERIAL 004920
CPUMODEL 2965 # CPU model number
MAINSIZE 2048
CNSLPORT 3270
NUMCPU 4
# ARCHMODE ESA/390
ARCHLVL z/ARCH
ARCHLVL ENABLE
ARCHLVL ENABLE PROBSTATE_DIAGF08
ARCHLVL ENABLE VIRTUAL_MACHINE
ARCHLVL ENABLE QDIO_ASSIST
ARCHLVL ENABLE QDIO_TDD
ARCHLVL ENABLE asn_lx_reuse
ARCHLVL ENABLE BIT44
DIAG8CMD ENABLE
ECPSVM ENABLE
LOADPARM 0A00....
LPARNUM 1
LPARNAME ZVM1
SYSEPOCH 1900
TZOFFSET +0100
OSTAILOR QUIET
PANRATE 1000
PGMPRDOS LICENSED
DEVTMAX 150
# neue Prio-Werte ab Version 3.05
HERCPRIO 0
TODPRIO -20
DEVPRIO 8
CPUPRIO 15
# alte Werte vor offizieller Version 3.05
# HERCPRIO 0
# DEVPRIO -8
# TODPRIO 0
# CPUPRIO 0
# cckd parameter
# cckd compparm=5
# Card Readers

#000C 3505 e:/daten/ipl390/standalone/iplddrxa.rdr ebcdic
#001C 3505 e:/daten/ipl390/standalone/iplickdsf.rdr ebcdic
#002C 3505 e:/daten/ipl390/standalone/iplsalipl.rdr ebcdic

# Line Printers

000E 1403 d:/temp/prt00e.txt crlf

# DASD Devices

#0430 3390 E:/daten/ipl390/dasd/430res.zvm cu=3990
sf=E:/daten/ipl390/dasd/430res_1.zvm
#0431 3390 E:/daten/ipl390/dasd/430w01.zvm cu=3990
sf=E:/daten/ipl390/dasd/430w01_1.zvm
#0432 3390 E:/daten/ipl390/dasd/430w02.zvm cu=3990
sf=E:/daten/ipl390/dasd/430w02_1.zvm
#0433 3390 E:/daten/ipl390/dasd/430w03.zvm cu=3990
sf=E:/daten/ipl390/dasd/430w03_1.zvm
#0440 3390 E:/daten/ipl390/dasd/440res.zvm cu=3990
sf=E:/daten/ipl390/dasd/440res_1.zvm
#0441 3390 E:/daten/ipl390/dasd/440w01.zvm cu=3990
sf=E:/daten/ipl390/dasd/440w01_1.zvm
#0442 3390 E:/daten/ipl390/dasd/440w02.zvm cu=3990
sf=E:/daten/ipl390/dasd/440w02_1.zvm
0600 3390 E:/daten/ipl390/dasd/VSErs1.zvm cu=3990
sf=E:/daten/ipl390/dasd/VSErs1_1.zvm
0601 3390 E:/daten/ipl390/dasd/VSErs2.zvm cu=3990
sf=E:/daten/ipl390/dasd/VSErs2_1.zvm
0602 3390 E:/daten/ipl390/dasd/VSEsys.zvm cu=3990
sf=E:/daten/ipl390/dasd/VSEsys_1.zvm
0603 3390 E:/daten/ipl390/dasd/VSEVSM.zvm cu=3990
sf=E:/daten/ipl390/dasd/VSEVSM_1.zvm
0604 3380 E:/daten/ipl390/dasd/VSE231.zvm cu=3990
sf=E:/daten/ipl390/dasd/VSE231_1.zvm
0605 3380 E:/daten/ipl390/dasd/VSE232.zvm cu=3990
sf=E:/daten/ipl390/dasd/VSE232_1.zvm
0606 3380 E:/daten/ipl390/dasd/VSEDAT.zvm cu=3990
sf=E:/daten/ipl390/dasd/VSEDAT_1.zvm
0607 3390 E:/daten/ipl390/dasd/V31RES.zvm cu=3990
sf=E:/daten/ipl390/dasd/V31RES_1.zvm
0608 3390 E:/daten/ipl390/dasd/V31WK1.zvm cu=3990
sf=E:/daten/ipl390/dasd/V31WK1_1.zvm
0609 3390 E:/daten/ipl390/dasd/V41RSA.zvm cu=3990
sf=E:/daten/ipl390/dasd/V41RSA_1.zvm
060A 3390 E:/daten/ipl390/dasd/V41W1A.zvm cu=3990
sf=E:/daten/ipl390/dasd/V41W1A_1.zvm
060B 3390 E:/daten/ipl390/dasd/VSESY1.zvm cu=3990
sf=E:/daten/ipl390/dasd/VSESY1_1.zvm
060C 3390 E:/daten/ipl390/dasd/VSESY2.zvm cu=3990
sf=E:/daten/ipl390/dasd/VSESY2_1.zvm
060D 3390 E:/daten/ipl390/dasd/VSESY3.zvm cu=3990
sf=E:/daten/ipl390/dasd/VSESY3_1.zvm
060E 3390 E:/daten/ipl390/dasd/VTAP01.zvm cu=3990
sf=E:/daten/ipl390/dasd/VTAP01_1.zvm
0619 3390 E:/daten/ipl390/dasd/V41RSB.zvm cu=3990
sf=E:/daten/ipl390/dasd/V41RSB_1.zvm
061A 3390 E:/daten/ipl390/dasd/V41W1B.zvm cu=3990
sf=E:/daten/ipl390/dasd/V41W1B_1.zvm
511A 3390 E:/daten/ipl390/dasd/V51RES.zvm cu=3990
sf=E:/daten/ipl390/dasd/V51RES_1.zvm
511B 3390 E:/daten/ipl390/dasd/V51WK1.zvm cu=3990
sf=E:/daten/ipl390/dasd/V51WK1_1.zvm
512A 3390 E:/daten/ipl390/dasd/VSE512.zvm cu=3990
sf=E:/daten/ipl390/dasd/VSE512_1.zvm
0700 3390 E:/daten/ipl390/dasd/zvmadd.zvm cu=3990
sf=E:/daten/ipl390/dasd/zvmadd_1.zvm
0701 3390 E:/daten/ipl390/dasd/cmswk1.zvm cu=3990
sf=E:/daten/ipl390/dasd/cmswk1_1.zvm
0702 3390 E:/daten/ipl390/dasd/BCUSR1.zvm cu=3990
sf=E:/daten/ipl390/dasd/BCUSR1_1.zvm
0703 3390 E:/daten/ipl390/dasd/T33901.zvm cu=3990
0704 3390 E:/daten/ipl390/dasd/cmswk2.zvm cu=3990
sf=E:/daten/ipl390/dasd/cmswk2_1.zvm
0705 3390 E:/daten/ipl390/dasd/cmswk3.zvm cu=3990
sf=E:/daten/ipl390/dasd/cmswk3_1.zvm
0706 3390 E:/daten/ipl390/dasd/BCUSR2.zvm cu=3990
sf=E:/daten/ipl390/dasd/BCUSR2_1.zvm
# VM-Systeme
0530 3390 E:/daten/ipl390/dasd/530res.zvm cu=3990
sf=E:/daten/ipl390/dasd/530res_1.zvm
0531 3390 E:/daten/ipl390/dasd/530pag.zvm cu=3990
sf=E:/daten/ipl390/dasd/530pag_1.zvm
0532 3390 E:/daten/ipl390/dasd/530spl.zvm cu=3990
sf=E:/daten/ipl390/dasd/530spl_1.zvm
0533 3390 E:/daten/ipl390/dasd/530w01.zvm cu=3990
sf=E:/daten/ipl390/dasd/530w01_1.zvm
0540 3390 E:/daten/ipl390/dasd/540res.zvm cu=3990
sf=E:/daten/ipl390/dasd/540res_1.zvm
0541 3390 E:/daten/ipl390/dasd/540pag.zvm cu=3990
sf=E:/daten/ipl390/dasd/540pag_1.zvm
0542 3390 E:/daten/ipl390/dasd/540spl.zvm cu=3990
sf=E:/daten/ipl390/dasd/540spl_1.zvm
0620 3390 E:/daten/ipl390/dasd/m01res.zvm62 cu=3990
sf=E:/daten/ipl390/dasd/m01res_1.zvm62
0621 3390 E:/daten/ipl390/dasd/m01s01.zvm62 cu=3990
sf=E:/daten/ipl390/dasd/m01s01_1.zvm62
0622 3390 E:/daten/ipl390/dasd/m01p01.zvm62 cu=3990
sf=E:/daten/ipl390/dasd/m01p01_1.zvm62
0623 3390 E:/daten/ipl390/dasd/vmcom1.zvm62 cu=3990
sf=E:/daten/ipl390/dasd/vmcom1_1.zvm62
0624 3390 E:/daten/ipl390/dasd/620rl1.zvm62 cu=3990
sf=E:/daten/ipl390/dasd/620rl1_1.zvm62
0630 3390 E:/daten/ipl390/dasd/630res.zvm cu=3990
sf=E:/daten/ipl390/dasd/630res_1.zvm
0631 3390 E:/daten/ipl390/dasd/630pg1.zvm cu=3990
sf=E:/daten/ipl390/dasd/630pg1_1.zvm
0632 3390 E:/daten/ipl390/dasd/630sp1.zvm cu=3990
sf=E:/daten/ipl390/dasd/630sp1_1.zvm
0633 3390 E:/daten/ipl390/dasd/630com.zvm cu=3990
sf=E:/daten/ipl390/dasd/630com_1.zvm
0634 3390 E:/daten/ipl390/dasd/630rl1.zvm cu=3990
sf=E:/daten/ipl390/dasd/630rl1_1.zvm
0635 3390 E:/daten/ipl390/dasd/630w01.zvm cu=3990
sf=E:/daten/ipl390/dasd/630w01_1.zvm
#0640 3390 E:/daten/ipl390/dasd/640res.zvm cu=3990
sf=E:/daten/ipl390/dasd/640res_1.zvm
#0641 3390 E:/daten/ipl390/dasd/640s01.zvm cu=3990
sf=E:/daten/ipl390/dasd/640s01_1.zvm
#0642 3390 E:/daten/ipl390/dasd/640p01.zvm cu=3990
sf=E:/daten/ipl390/dasd/640p01_1.zvm
#0643 3390 E:/daten/ipl390/dasd/64com1.zvm cu=3990
sf=E:/daten/ipl390/dasd/64com1_1.zvm
#0644 3390 E:/daten/ipl390/dasd/640rl1.zvm cu=3990
sf=E:/daten/ipl390/dasd/640rl1_1.zvm
#0645 3390 E:/daten/ipl390/dasd/640W01.zvm cu=3990
sf=E:/daten/ipl390/dasd/640W01_1.zvm
1206 3390 E:/daten/ipl390/dasd/640res.zvm cu=3990
sf=E:/daten/ipl390/dasd/640res_1.zvm
1207 3390 E:/daten/ipl390/dasd/640s01.zvm cu=3990
sf=E:/daten/ipl390/dasd/640s01_1.zvm
1208 3390 E:/daten/ipl390/dasd/640p01.zvm cu=3990
sf=E:/daten/ipl390/dasd/640p01_1.zvm
1209 3390 E:/daten/ipl390/dasd/64com1.zvm cu=3990
sf=E:/daten/ipl390/dasd/64com1_1.zvm
120A 3390 E:/daten/ipl390/dasd/640rl1.zvm cu=3990
sf=E:/daten/ipl390/dasd/640rl1_1.zvm
120B 3390 E:/daten/ipl390/dasd/640W01.zvm cu=3990
sf=E:/daten/ipl390/dasd/640W01_1.zvm
FF01 3390 E:/daten/ipl390/dasd/TEMP01.zvm cu=3990
sf=E:/daten/ipl390/dasd/TEMP01_1.zvm
FF02 3390 E:/daten/ipl390/dasd/TEMP02.zvm cu=3990
sf=E:/daten/ipl390/dasd/TEMP02_1.zvm
# Test für VSEDASD-Rexx
FF03 3390 E:/daten/ipl390/dasd/TEMP03.zvm cu=3990
sf=E:/daten/ipl390/dasd/TEMP03_1.zvm
# WM SE VSE01 Systemplatten für FSU
FF10 3390 E:/daten/ipl390/dasd/WMVS01.zvm cu=3990
sf=E:/daten/ipl390/dasd/WMVS01_1.zvm
FF99 3390 E:/daten/ipl390/dasd/VTAP01.zvmx cu=3990
sf=E:/daten/ipl390/dasd/VTAP01_1.zvmx
*
3000 3390 e:/daten/ipl390/dasd/BGETM1.zVM cu=3990
sf=e:/daten/ipl390/dasd/BGETM1_1.zvm
3001 3390 e:/daten/ipl390/dasd/BGETM2.zVM cu=3990
sf=e:/daten/ipl390/dasd/BGETM2_1.zvm
3002 3390 e:/daten/ipl390/dasd/BGETM3.zVM cu=3990
sf=e:/daten/ipl390/dasd/BGETM3_1.zvm
* neue VSE-Systeme
A422 3390 e:/daten/ipl390/dasd/VS422A.zVM cu=3990
sf=e:/daten/ipl390/dasd/VS422A_1.zvm
B422 3390 e:/daten/ipl390/dasd/VS422B.zVM cu=3990
sf=e:/daten/ipl390/dasd/VS422B_1.zvm

# TAPE Devices

0181 3490 *
0182 3490 *
0183 3490 *
0184 3490 *
0310 3490 *
0311 3490 *
0312 3490 *
0313 3490 *
0314 3490 *
0315 3490 *
0316 3490 *
0317 3490 *
0318 3490 *
0319 3490 *
0320 3490 *
0321 3490 *
0322 3490 *
0323 3490 *
0324 3490 *
0325 3490 *
0326 3490 *
0327 3490 *
0328 3490 *
0329 3490 *
0330 3490 *
0331 3490 *
0332 3490 *
0333 3490 *
0334 3490 *
0335 3490 *
0336 3490 *
0337 3490 *
0338 3490 *
0339 3490 *
0340 3490 *
0341 3490 *
0342 3490 *
0343 3490 *
0344 3490 *
0345 3490 *
0346 3490 *
0347 3490 *
0348 3490 *
0349 3490 *
0350 3490 *
0351 3490 *
0352 3490 *
0353 3490 *
0354 3490 *
0355 3490 *
0356 3490 *
0357 3490 *
0358 3490 *
0359 3490 *
0360 3490 *
0361 3490 *
0362 3490 *
0363 3490 *
0364 3490 *
0365 3490 *
0366 3490 *
0367 3490 *
0368 3490 *
0369 3490 *
0370 3490 *
0371 3490 *
0372 3490 *
0373 3490 *
0374 3490 *
0375 3490 *
0376 3490 *
0377 3490 *
0378 3490 *
0379 3490 *

# 3270 Display

0A00 3270 ZVMCONS
0A01 3270
0A02 3270
0A03 3270
00F0 3270 zos
00F1 3270 zos
00F3 3270 zos
0040 3270 CONSOLE

# Network Connection
# zVM
1000-1001 ctci -k 1024 -i 128 -n 42-00-47-11-08-15 192.168.147.1 0.0.0.0
1002-1003 ctci -n 42-00-47-11-08-15 192.168.147.2 0.0.0.0
1004-1005 ctci -n 42-00-47-11-08-15 192.168.147.3 0.0.0.0
1006-1007 ctci -n 42-00-47-11-08-15 192.168.147.4 0.0.0.0
1008-1009 ctci -n 42-00-47-11-08-15 192.168.147.5 0.0.0.0
#E10-E1A LCS -n 42-00-47-11-08-15 -o
e:/programme/hercules/herccfg/hercosa.oat

Hercules Log

13:49:09 HHCCP075I 1206:Stat=0C00 Count=0000 =>08CC8009 00000000
00000000 40000000 ............ ...
13:49:09 1206:end i/o bufcur 0 cache[207] waiters 0
13:49:09 HHCCP050I 1206:SCSW=00C04007 Stat=0C00 Count=0000 CCW=3FFA7250
13:49:09 08:49:09 z/VM V6 R4.0 SERVICE LEVEL 1601 (64-BIT)
13:49:09 08:49:09 SYSTEM NUCLEUS CREATED ON 2017-03-21 AT 07:00:53,
LOADED FROM 640RES
13:49:09 08:49:09
13:49:09 08:49:09
****************************************************************
13:49:09 08:49:09 * LICENSED MATERIALS - PROPERTY OF
IBM* *
13:49:09 08:49:09
* *
13:49:09 08:49:09 * 5741-A07 (C) COPYRIGHT IBM CORP. 1983, 2016. ALL
RIGHTS *
13:49:09 08:49:09 * RESERVED. US GOVERNMENT USERS RESTRICTED RIGHTS -
USE, *
13:49:09 <pnl,color(green,black)>08:49:09 * DUPLICATION OR DISCLOSURE
RESTRICTED BY GSA ADP SCHEDULE *
13:49:09 08:49:09 * CONTRACT WITH IBM
CORP. *
13:49:09 08:49:09
* *
13:49:09 08:49:09 * * TRADEMARK OF INTERNATIONAL BUSINESS
MACHINES. *
13:49:09 08:49:09
****************************************************************
13:49:09 08:49:09
13:49:09 08:49:09 HCPZCO6718I Using parm disk 1 on volume 64COM1 (device
1209).
13:49:09 08:49:09 HCPZCO6718I Parm disk resides on cylinders 1 through 120.
13:49:09 08:49:09 Start ((Warm Force COLD CLEAN) (DRain) (DIsable)
(NODIRect)
13:49:09 08:49:09 (NOAUTOlog)) or (SHUTDOWN)
13:49:09 HCPSED6013A A CP read is pending.
13:49:20 scp
13:49:20 08:49:20
13:49:20 08:49:20 NOW 08:49:20 EDT THURSDAY 2017-04-20
13:49:20 08:49:20 Change TOD clock (Yes No)
13:49:20 HCPSED6013A A CP read is pending.
13:49:24 scp
13:49:24 1206:start i/o file[0] bufcur 0 cache[207]
13:49:24 1206:synchronous I/O ccw addr 3ffa7318
13:49:24 HHCCP048I 1206:CCW=63400010 3FFA7330=>40C00050 00000000
00000000 00000000 {.&............
13:49:24 HHCCP075I 1206:Stat=0C00 Count=0000
13:49:24 HHCCP048I 1206:CCW=47600010 3FFA7340=>16000001 00000000
00000000 03000000 ................
13:49:24 1206:HHCDA038I seeking to cyl 0 head 0
13:49:24 1206:HHCDA041I read count orientation is index
13:49:24 1206:HHCDA043I cyl 0 head 0 record 0 kl 0 dl 8 of 0
13:49:24 1206:HHCDA041I read count orientation is count
13:49:24 1206:HHCDA043I cyl 0 head 0 record 1 kl 0 dl 24 of 0
13:49:24 1206:HHCDA041I read count orientation is count
13:49:24 1206:HHCDA043I cyl 0 head 0 record 2 kl 0 dl 4096 of 0
13:49:24 1206:HHCDA041I read count orientation is count
13:49:24 1206:HHCDA043I cyl 0 head 0 record 3 kl 4 dl 80 of 0
13:49:24 HHCCP075I 1206:Stat=0C00 Count=0000
13:49:24 HHCCP048I 1206:CCW=86200050 5FFA71A8=>00000000 00000000
00000000 00000000 ................
13:49:24 1206:HHCDA045I read data 80 bytes
13:49:24 HHCCP075I 1206:Stat=0C00 Count=0000 =>E5D6D3F1 F6F4F0D9
C5E2F000 00000005 VOL1640RES0.....
13:49:24 1206:end i/o bufcur 0 cache[207] waiters 0
13:49:24 HHCCP050I 1206:SCSW=00C04007 Stat=0C00 Count=0000 CCW=3FFA7330
13:49:24 1206:start i/o file[0] bufcur 0 cache[207]
13:49:24 1206:synchronous I/O ccw addr 3ffa7388
13:49:24 HHCCP048I 1206:CCW=63400010 3FFA73A0=>40C01000 00000000
00000000 00000000 {..............
13:49:24 HHCCP075I 1206:Stat=0C00 Count=0000
13:49:24 HHCCP048I 1206:CCW=47600010 3FFA73B0=>16000001 00000000
00000000 04000000 ................
13:49:24 1206:HHCDA038I seeking to cyl 0 head 0
13:49:24 1206:HHCDA041I read count orientation is index
13:49:24 1206:HHCDA043I cyl 0 head 0 record 0 kl 0 dl 8 of 0
13:49:24 1206:HHCDA041I read count orientation is count
13:49:24 1206:HHCDA043I cyl 0 head 0 record 1 kl 0 dl 24 of 0
13:49:24 1206:HHCDA041I read count orientation is count
13:49:24 1206:HHCDA043I cyl 0 head 0 record 2 kl 0 dl 4096 of 0
13:49:24 1206:HHCDA041I read count orientation is count
13:49:24 1206:HHCDA043I cyl 0 head 0 record 3 kl 4 dl 80 of 0
13:49:24 1206:HHCDA041I read count orientation is count
13:49:24 1206:HHCDA043I cyl 0 head 0 record 4 kl 0 dl 4096 of 0
13:49:24 HHCCP075I 1206:Stat=0C00 Count=0000
13:49:24 HHCCP048I 1206:CCW=86201000 3FD32000=>00000000 00000000
00000000 00000000 ................
13:49:24 1206:HHCDA045I read data 4096 bytes
13:49:24 HHCCP075I 1206:Stat=0C00 Count=0000 =>08CC8009 00000000
00000000 40000000 ............ ...
13:49:24 1206:end i/o bufcur 0 cache[207] waiters 0
13:49:24 HHCCP050I 1206:SCSW=00C04007 Stat=0C00 Count=0000 CCW=3FFA73A0
13:49:24 1206:start i/o file[0] bufcur 0 cache[207]
13:49:24 1206:synchronous I/O ccw addr 1fddd000
13:49:24 HHCCP048I 1206:CCW=E7400040 1FDDDF50=>01800000 00000000
00000000 40C01000 ............ {..
13:49:24 HHCCP075I 1206:Stat=0E40 Count=0040
13:49:24 HHCCP076I 1206:Sense=80000000 00FFFF01 00000000 00000000
00000000 00000000
13:49:24 HHCCP077I 1206:Sense=CMDREJ
13:49:24 1206:end i/o bufcur 0 cache[207] waiters 0
13:49:24 HHCCP050I 1206:SCSW=00C24017 Stat=0E40 Count=0040 CCW=1FDDD008
13:49:24 08:49:24
13:49:24 1206:start i/o file[0] bufcur 0 cache[207]
13:49:24 1206:synchronous I/O ccw addr 3fd3c000
13:49:24 HHCCP048I 1206:CCW=E7400040 3FD3CF50=>01800000 00000000
00000000 40C01000 ............ {..
13:49:24 HHCCP075I 1206:Stat=0E40 Count=0040
13:49:24 HHCCP076I 1206:Sense=80000000 00FFFF01 00000000 00000000
00000000 00000000
13:49:24 HHCCP077I 1206:Sense=CMDREJ
13:49:24 1206:end i/o bufcur 0 cache[207] waiters 0
13:49:24 HHCCP050I 1206:SCSW=00C24017 Stat=0E40 Count=0040 CCW=3FD3C008
13:49:24 08:49:24 HCPERP500I DASD 1206 AN OPERATION WAS TERMINATED
BECAUSE A
13:49:24 08:49:24 HCPERP500I COMMAND REJECT ERROR OCCURRED
13:49:24 08:49:24 HCPERP6300I SENSE DATA FORMAT = 00 MSG CODE = 01
13:49:24 08:49:24 HCPERP6301I CHANNEL COMMAND WORD COMMAND CODE = N/A HPF
13:49:24 08:49:24 HCPERP6302I SEEK ADDRESS = 000000000000
13:49:24 08:49:24 HCPERP6303I SENSE = 80000000 00FFFF01 00000000
00000000 00000000
13:49:24 08:49:24 HCPERP6303I 00000000 00000080 00000000
13:49:24 08:49:24 HCPERP6304I IRB = 00C24017 1FDDD008 0E400040 00800000
13:49:24 08:49:24 HCPERP6305I USERID = SYSTEM
13:49:24 08:49:24 HCPERP2216I CHANNEL PATH ID = 12
13:49:24 08:49:24 HCPUDS1777E The directory on volume 640RES could not
be initialized.
13:49:24 08:49:24 HCPUDS1752E No directory could be initialized.
13:49:24 08:49:24 HCPERP500I DASD 1206 AN OPERATION WAS TERMINATED
BECAUSE A
13:49:24 08:49:24 HCPERP500I COMMAND REJECT ERROR OCCURRED
13:49:24 08:49:24 HCPERP6300I SENSE DATA FORMAT = 00 MSG CODE = 01
13:49:24 08:49:24 HCPERP6301I CHANNEL COMMAND WORD COMMAND CODE = N/A HPF
13:49:24 08:49:24 HCPERP6302I SEEK ADDRESS = 000000000000
13:49:24 08:49:24 HCPERP6303I SENSE = 80000000 00FFFF01 00000000
00000000 00000000
13:49:24 08:49:24 HCPERP6303I 00000000 00000080 00000000
13:49:24 08:49:24 HCPERP6304I IRB = 00C24017 3FD3C008 0E400040 00800000
13:49:24 08:49:24 HCPERP6305I USERID = SYSTEM
13:49:24 08:49:24 HCPERP2216I CHANNEL PATH ID = 12
13:49:24 08:49:24 HCPWRM902W System recovery failure; fatal I/O error
13:49:24 08:49:24 HCPWRP959I ZVM6401 SYSTEM TERMINATION IN PROGRESS ON
2017-04-20
13:49:27 HHCCP011I CPU0000: Disabled wait state
13:49:27 PSW=00020000 00000000 0000000000000902


Am 27.03.2017 um 14:26 schrieb Franz Josef Pohlen
Post by Franz Josef Pohlen fjpohlen-***@gmx.de [hercules-390]
Hello Ivan,
I have tried your recommendation ARCHLVL ENABLE BIT44. The msg
HCPRFI9030W doesn't appear any longer but now after the standalone
loader screen and PF10 there is an X SYSTEM in the emulation window and
suddenly afterwards a PROG708. This means that an SNA msg was received
before the begin of the data transmission. I use Personal Communication
as a console emulation as always and had never problems before.
Any help is welcome.
--
kind regards
Franz Josef Pohlen


------------------------------------

------------------------------------

Community email addresses:
Post message: hercules-***@yahoogroups.com
Subscribe: hercules-390-***@yahoogroups.com
Unsubscribe: hercules-390-***@yahoogroups.com
List owner: hercules-390-***@yahoogroups.com

Files and archives at:
http://groups.yahoo.com/group/hercules-390

Get the latest version of Hercules from:
http://www.hercules-390.org


------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/hercules-390/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/hercules-390/join
(Yahoo! ID required)

<*> To change settings via email:
hercules-390-***@yahoogroups.com
hercules-390-***@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
hercules-390-***@yahoogroups.com

<*> Your use of Yahoo Groups is subject to:
https://info.yahoo.com/legal/us/yahoo/utos/terms/
Franz Josef Pohlen fjpohlen-maillist@gmx.de [hercules-390]
2017-04-21 14:19:58 UTC
Permalink
I have just seen this VM message in the log after the command reject.

HCPERP6301I CHANNEL COMMAND WORD COMMAND CODE = N/A HPF

I wonder if the word HPF may point to a check of zVM if High Perfomance Ficon is available and Hercules doesn't react on this as expected.

Am 21.04.2017 um 14:35 schrieb Franz Josef Pohlen
Post by Franz Josef Pohlen fjpohlen-***@gmx.de [hercules-390]
Hello all,
as the Hercules 4.0 doesn't seem to be working for the current zvm. I
will try to get the zvm 6.4 running with Hercules 3.12 (Win 64Bit). I
get an error during IPL after I have confirmed the time question. It
cancels with command reject on the IPL device. For documentation I have
started a ccw trace on the ipl device and ipled the zvm 6.4 with
cons=sysc. So the zVM messages and the ccw trace is in the log. I hope
that someone of you developers can see there what's going wrong. My old
zvm 6.3 starts without problems on this hercules configuration. I have
also attached my hercules config. There might still be some settings for
Hercules 4.0 but they were ignored during start with Hercules 3.12.
Thanks in advance for your help and have a nice weekend
Franz Josef
Hercules Config
#
# Hercules Emulator Control file...
# Description: Standalone DDR
# MaxShutdownSecs: 99
#
#
# System parameters
#
CPUSERIAL 004920
CPUMODEL 2965 # CPU model number
MAINSIZE 2048
CNSLPORT 3270
NUMCPU 4
# ARCHMODE ESA/390
ARCHLVL z/ARCH
ARCHLVL ENABLE
ARCHLVL ENABLE PROBSTATE_DIAGF08
ARCHLVL ENABLE VIRTUAL_MACHINE
ARCHLVL ENABLE QDIO_ASSIST
ARCHLVL ENABLE QDIO_TDD
ARCHLVL ENABLE asn_lx_reuse
ARCHLVL ENABLE BIT44
DIAG8CMD ENABLE
ECPSVM ENABLE
LOADPARM 0A00....
LPARNUM 1
LPARNAME ZVM1
SYSEPOCH 1900
TZOFFSET +0100
OSTAILOR QUIET
PANRATE 1000
PGMPRDOS LICENSED
DEVTMAX 150
# neue Prio-Werte ab Version 3.05
HERCPRIO 0
TODPRIO -20
DEVPRIO 8
CPUPRIO 15
# alte Werte vor offizieller Version 3.05
# HERCPRIO 0
# DEVPRIO -8
# TODPRIO 0
# CPUPRIO 0
# cckd parameter
# cckd compparm=5
# Card Readers
#000C 3505 e:/daten/ipl390/standalone/iplddrxa.rdr ebcdic
#001C 3505 e:/daten/ipl390/standalone/iplickdsf.rdr ebcdic
#002C 3505 e:/daten/ipl390/standalone/iplsalipl.rdr ebcdic
# Line Printers
000E 1403 d:/temp/prt00e.txt crlf
# DASD Devices
#0430 3390 E:/daten/ipl390/dasd/430res.zvm cu=3990
sf=E:/daten/ipl390/dasd/430res_1.zvm
#0431 3390 E:/daten/ipl390/dasd/430w01.zvm cu=3990
sf=E:/daten/ipl390/dasd/430w01_1.zvm
#0432 3390 E:/daten/ipl390/dasd/430w02.zvm cu=3990
sf=E:/daten/ipl390/dasd/430w02_1.zvm
#0433 3390 E:/daten/ipl390/dasd/430w03.zvm cu=3990
sf=E:/daten/ipl390/dasd/430w03_1.zvm
#0440 3390 E:/daten/ipl390/dasd/440res.zvm cu=3990
sf=E:/daten/ipl390/dasd/440res_1.zvm
#0441 3390 E:/daten/ipl390/dasd/440w01.zvm cu=3990
sf=E:/daten/ipl390/dasd/440w01_1.zvm
#0442 3390 E:/daten/ipl390/dasd/440w02.zvm cu=3990
sf=E:/daten/ipl390/dasd/440w02_1.zvm
0600 3390 E:/daten/ipl390/dasd/VSErs1.zvm cu=3990
sf=E:/daten/ipl390/dasd/VSErs1_1.zvm
0601 3390 E:/daten/ipl390/dasd/VSErs2.zvm cu=3990
sf=E:/daten/ipl390/dasd/VSErs2_1.zvm
0602 3390 E:/daten/ipl390/dasd/VSEsys.zvm cu=3990
sf=E:/daten/ipl390/dasd/VSEsys_1.zvm
0603 3390 E:/daten/ipl390/dasd/VSEVSM.zvm cu=3990
sf=E:/daten/ipl390/dasd/VSEVSM_1.zvm
0604 3380 E:/daten/ipl390/dasd/VSE231.zvm cu=3990
sf=E:/daten/ipl390/dasd/VSE231_1.zvm
0605 3380 E:/daten/ipl390/dasd/VSE232.zvm cu=3990
sf=E:/daten/ipl390/dasd/VSE232_1.zvm
0606 3380 E:/daten/ipl390/dasd/VSEDAT.zvm cu=3990
sf=E:/daten/ipl390/dasd/VSEDAT_1.zvm
0607 3390 E:/daten/ipl390/dasd/V31RES.zvm cu=3990
sf=E:/daten/ipl390/dasd/V31RES_1.zvm
0608 3390 E:/daten/ipl390/dasd/V31WK1.zvm cu=3990
sf=E:/daten/ipl390/dasd/V31WK1_1.zvm
0609 3390 E:/daten/ipl390/dasd/V41RSA.zvm cu=3990
sf=E:/daten/ipl390/dasd/V41RSA_1.zvm
060A 3390 E:/daten/ipl390/dasd/V41W1A.zvm cu=3990
sf=E:/daten/ipl390/dasd/V41W1A_1.zvm
060B 3390 E:/daten/ipl390/dasd/VSESY1.zvm cu=3990
sf=E:/daten/ipl390/dasd/VSESY1_1.zvm
060C 3390 E:/daten/ipl390/dasd/VSESY2.zvm cu=3990
sf=E:/daten/ipl390/dasd/VSESY2_1.zvm
060D 3390 E:/daten/ipl390/dasd/VSESY3.zvm cu=3990
sf=E:/daten/ipl390/dasd/VSESY3_1.zvm
060E 3390 E:/daten/ipl390/dasd/VTAP01.zvm cu=3990
sf=E:/daten/ipl390/dasd/VTAP01_1.zvm
0619 3390 E:/daten/ipl390/dasd/V41RSB.zvm cu=3990
sf=E:/daten/ipl390/dasd/V41RSB_1.zvm
061A 3390 E:/daten/ipl390/dasd/V41W1B.zvm cu=3990
sf=E:/daten/ipl390/dasd/V41W1B_1.zvm
511A 3390 E:/daten/ipl390/dasd/V51RES.zvm cu=3990
sf=E:/daten/ipl390/dasd/V51RES_1.zvm
511B 3390 E:/daten/ipl390/dasd/V51WK1.zvm cu=3990
sf=E:/daten/ipl390/dasd/V51WK1_1.zvm
512A 3390 E:/daten/ipl390/dasd/VSE512.zvm cu=3990
sf=E:/daten/ipl390/dasd/VSE512_1.zvm
0700 3390 E:/daten/ipl390/dasd/zvmadd.zvm cu=3990
sf=E:/daten/ipl390/dasd/zvmadd_1.zvm
0701 3390 E:/daten/ipl390/dasd/cmswk1.zvm cu=3990
sf=E:/daten/ipl390/dasd/cmswk1_1.zvm
0702 3390 E:/daten/ipl390/dasd/BCUSR1.zvm cu=3990
sf=E:/daten/ipl390/dasd/BCUSR1_1.zvm
0703 3390 E:/daten/ipl390/dasd/T33901.zvm cu=3990
0704 3390 E:/daten/ipl390/dasd/cmswk2.zvm cu=3990
sf=E:/daten/ipl390/dasd/cmswk2_1.zvm
0705 3390 E:/daten/ipl390/dasd/cmswk3.zvm cu=3990
sf=E:/daten/ipl390/dasd/cmswk3_1.zvm
0706 3390 E:/daten/ipl390/dasd/BCUSR2.zvm cu=3990
sf=E:/daten/ipl390/dasd/BCUSR2_1.zvm
# VM-Systeme
0530 3390 E:/daten/ipl390/dasd/530res.zvm cu=3990
sf=E:/daten/ipl390/dasd/530res_1.zvm
0531 3390 E:/daten/ipl390/dasd/530pag.zvm cu=3990
sf=E:/daten/ipl390/dasd/530pag_1.zvm
0532 3390 E:/daten/ipl390/dasd/530spl.zvm cu=3990
sf=E:/daten/ipl390/dasd/530spl_1.zvm
0533 3390 E:/daten/ipl390/dasd/530w01.zvm cu=3990
sf=E:/daten/ipl390/dasd/530w01_1.zvm
0540 3390 E:/daten/ipl390/dasd/540res.zvm cu=3990
sf=E:/daten/ipl390/dasd/540res_1.zvm
0541 3390 E:/daten/ipl390/dasd/540pag.zvm cu=3990
sf=E:/daten/ipl390/dasd/540pag_1.zvm
0542 3390 E:/daten/ipl390/dasd/540spl.zvm cu=3990
sf=E:/daten/ipl390/dasd/540spl_1.zvm
0620 3390 E:/daten/ipl390/dasd/m01res.zvm62 cu=3990
sf=E:/daten/ipl390/dasd/m01res_1.zvm62
0621 3390 E:/daten/ipl390/dasd/m01s01.zvm62 cu=3990
sf=E:/daten/ipl390/dasd/m01s01_1.zvm62
0622 3390 E:/daten/ipl390/dasd/m01p01.zvm62 cu=3990
sf=E:/daten/ipl390/dasd/m01p01_1.zvm62
0623 3390 E:/daten/ipl390/dasd/vmcom1.zvm62 cu=3990
sf=E:/daten/ipl390/dasd/vmcom1_1.zvm62
0624 3390 E:/daten/ipl390/dasd/620rl1.zvm62 cu=3990
sf=E:/daten/ipl390/dasd/620rl1_1.zvm62
0630 3390 E:/daten/ipl390/dasd/630res.zvm cu=3990
sf=E:/daten/ipl390/dasd/630res_1.zvm
0631 3390 E:/daten/ipl390/dasd/630pg1.zvm cu=3990
sf=E:/daten/ipl390/dasd/630pg1_1.zvm
0632 3390 E:/daten/ipl390/dasd/630sp1.zvm cu=3990
sf=E:/daten/ipl390/dasd/630sp1_1.zvm
0633 3390 E:/daten/ipl390/dasd/630com.zvm cu=3990
sf=E:/daten/ipl390/dasd/630com_1.zvm
0634 3390 E:/daten/ipl390/dasd/630rl1.zvm cu=3990
sf=E:/daten/ipl390/dasd/630rl1_1.zvm
0635 3390 E:/daten/ipl390/dasd/630w01.zvm cu=3990
sf=E:/daten/ipl390/dasd/630w01_1.zvm
#0640 3390 E:/daten/ipl390/dasd/640res.zvm cu=3990
sf=E:/daten/ipl390/dasd/640res_1.zvm
#0641 3390 E:/daten/ipl390/dasd/640s01.zvm cu=3990
sf=E:/daten/ipl390/dasd/640s01_1.zvm
#0642 3390 E:/daten/ipl390/dasd/640p01.zvm cu=3990
sf=E:/daten/ipl390/dasd/640p01_1.zvm
#0643 3390 E:/daten/ipl390/dasd/64com1.zvm cu=3990
sf=E:/daten/ipl390/dasd/64com1_1.zvm
#0644 3390 E:/daten/ipl390/dasd/640rl1.zvm cu=3990
sf=E:/daten/ipl390/dasd/640rl1_1.zvm
#0645 3390 E:/daten/ipl390/dasd/640W01.zvm cu=3990
sf=E:/daten/ipl390/dasd/640W01_1.zvm
1206 3390 E:/daten/ipl390/dasd/640res.zvm cu=3990
sf=E:/daten/ipl390/dasd/640res_1.zvm
1207 3390 E:/daten/ipl390/dasd/640s01.zvm cu=3990
sf=E:/daten/ipl390/dasd/640s01_1.zvm
1208 3390 E:/daten/ipl390/dasd/640p01.zvm cu=3990
sf=E:/daten/ipl390/dasd/640p01_1.zvm
1209 3390 E:/daten/ipl390/dasd/64com1.zvm cu=3990
sf=E:/daten/ipl390/dasd/64com1_1.zvm
120A 3390 E:/daten/ipl390/dasd/640rl1.zvm cu=3990
sf=E:/daten/ipl390/dasd/640rl1_1.zvm
120B 3390 E:/daten/ipl390/dasd/640W01.zvm cu=3990
sf=E:/daten/ipl390/dasd/640W01_1.zvm
FF01 3390 E:/daten/ipl390/dasd/TEMP01.zvm cu=3990
sf=E:/daten/ipl390/dasd/TEMP01_1.zvm
FF02 3390 E:/daten/ipl390/dasd/TEMP02.zvm cu=3990
sf=E:/daten/ipl390/dasd/TEMP02_1.zvm
# Test für VSEDASD-Rexx
FF03 3390 E:/daten/ipl390/dasd/TEMP03.zvm cu=3990
sf=E:/daten/ipl390/dasd/TEMP03_1.zvm
# WM SE VSE01 Systemplatten für FSU
FF10 3390 E:/daten/ipl390/dasd/WMVS01.zvm cu=3990
sf=E:/daten/ipl390/dasd/WMVS01_1.zvm
FF99 3390 E:/daten/ipl390/dasd/VTAP01.zvmx cu=3990
sf=E:/daten/ipl390/dasd/VTAP01_1.zvmx
*
3000 3390 e:/daten/ipl390/dasd/BGETM1.zVM cu=3990
sf=e:/daten/ipl390/dasd/BGETM1_1.zvm
3001 3390 e:/daten/ipl390/dasd/BGETM2.zVM cu=3990
sf=e:/daten/ipl390/dasd/BGETM2_1.zvm
3002 3390 e:/daten/ipl390/dasd/BGETM3.zVM cu=3990
sf=e:/daten/ipl390/dasd/BGETM3_1.zvm
* neue VSE-Systeme
A422 3390 e:/daten/ipl390/dasd/VS422A.zVM cu=3990
sf=e:/daten/ipl390/dasd/VS422A_1.zvm
B422 3390 e:/daten/ipl390/dasd/VS422B.zVM cu=3990
sf=e:/daten/ipl390/dasd/VS422B_1.zvm
# TAPE Devices
0181 3490 *
0182 3490 *
0183 3490 *
0184 3490 *
0310 3490 *
0311 3490 *
0312 3490 *
0313 3490 *
0314 3490 *
0315 3490 *
0316 3490 *
0317 3490 *
0318 3490 *
0319 3490 *
0320 3490 *
0321 3490 *
0322 3490 *
0323 3490 *
0324 3490 *
0325 3490 *
0326 3490 *
0327 3490 *
0328 3490 *
0329 3490 *
0330 3490 *
0331 3490 *
0332 3490 *
0333 3490 *
0334 3490 *
0335 3490 *
0336 3490 *
0337 3490 *
0338 3490 *
0339 3490 *
0340 3490 *
0341 3490 *
0342 3490 *
0343 3490 *
0344 3490 *
0345 3490 *
0346 3490 *
0347 3490 *
0348 3490 *
0349 3490 *
0350 3490 *
0351 3490 *
0352 3490 *
0353 3490 *
0354 3490 *
0355 3490 *
0356 3490 *
0357 3490 *
0358 3490 *
0359 3490 *
0360 3490 *
0361 3490 *
0362 3490 *
0363 3490 *
0364 3490 *
0365 3490 *
0366 3490 *
0367 3490 *
0368 3490 *
0369 3490 *
0370 3490 *
0371 3490 *
0372 3490 *
0373 3490 *
0374 3490 *
0375 3490 *
0376 3490 *
0377 3490 *
0378 3490 *
0379 3490 *
# 3270 Display
0A00 3270 ZVMCONS
0A01 3270
0A02 3270
0A03 3270
00F0 3270 zos
00F1 3270 zos
00F3 3270 zos
0040 3270 CONSOLE
# Network Connection
# zVM
1000-1001 ctci -k 1024 -i 128 -n 42-00-47-11-08-15 192.168.147.1 0.0.0.0
1002-1003 ctci -n 42-00-47-11-08-15 192.168.147.2 0.0.0.0
1004-1005 ctci -n 42-00-47-11-08-15 192.168.147.3 0.0.0.0
1006-1007 ctci -n 42-00-47-11-08-15 192.168.147.4 0.0.0.0
1008-1009 ctci -n 42-00-47-11-08-15 192.168.147.5 0.0.0.0
#E10-E1A LCS -n 42-00-47-11-08-15 -o
e:/programme/hercules/herccfg/hercosa.oat
Hercules Log
13:49:09 HHCCP075I 1206:Stat=0C00 Count=0000 =>08CC8009 00000000
00000000 40000000 ............ ...
13:49:09 1206:end i/o bufcur 0 cache[207] waiters 0
13:49:09 HHCCP050I 1206:SCSW=00C04007 Stat=0C00 Count=0000 CCW=3FFA7250
13:49:09 08:49:09 z/VM V6 R4.0 SERVICE LEVEL 1601 (64-BIT)
13:49:09 08:49:09 SYSTEM NUCLEUS CREATED ON 2017-03-21 AT 07:00:53,
LOADED FROM 640RES
13:49:09 08:49:09
13:49:09 08:49:09
****************************************************************
13:49:09 08:49:09 * LICENSED MATERIALS - PROPERTY OF
IBM* *
13:49:09 08:49:09
* *
13:49:09 08:49:09 * 5741-A07 (C) COPYRIGHT IBM CORP. 1983, 2016. ALL
RIGHTS *
13:49:09 08:49:09 * RESERVED. US GOVERNMENT USERS RESTRICTED RIGHTS -
USE, *
13:49:09 <pnl,color(green,black)>08:49:09 * DUPLICATION OR DISCLOSURE
RESTRICTED BY GSA ADP SCHEDULE *
13:49:09 08:49:09 * CONTRACT WITH IBM
CORP. *
13:49:09 08:49:09
* *
13:49:09 08:49:09 * * TRADEMARK OF INTERNATIONAL BUSINESS
MACHINES. *
13:49:09 08:49:09
****************************************************************
13:49:09 08:49:09
13:49:09 08:49:09 HCPZCO6718I Using parm disk 1 on volume 64COM1 (device
1209).
13:49:09 08:49:09 HCPZCO6718I Parm disk resides on cylinders 1 through 120.
13:49:09 08:49:09 Start ((Warm Force COLD CLEAN) (DRain) (DIsable)
(NODIRect)
13:49:09 08:49:09 (NOAUTOlog)) or (SHUTDOWN)
13:49:09 HCPSED6013A A CP read is pending.
13:49:20 scp
13:49:20 08:49:20
13:49:20 08:49:20 NOW 08:49:20 EDT THURSDAY 2017-04-20
13:49:20 08:49:20 Change TOD clock (Yes No)
13:49:20 HCPSED6013A A CP read is pending.
13:49:24 scp
13:49:24 1206:start i/o file[0] bufcur 0 cache[207]
13:49:24 1206:synchronous I/O ccw addr 3ffa7318
13:49:24 HHCCP048I 1206:CCW=63400010 3FFA7330=>40C00050 00000000
00000000 00000000 {.&............
13:49:24 HHCCP075I 1206:Stat=0C00 Count=0000
13:49:24 HHCCP048I 1206:CCW=47600010 3FFA7340=>16000001 00000000
00000000 03000000 ................
13:49:24 1206:HHCDA038I seeking to cyl 0 head 0
13:49:24 1206:HHCDA041I read count orientation is index
13:49:24 1206:HHCDA043I cyl 0 head 0 record 0 kl 0 dl 8 of 0
13:49:24 1206:HHCDA041I read count orientation is count
13:49:24 1206:HHCDA043I cyl 0 head 0 record 1 kl 0 dl 24 of 0
13:49:24 1206:HHCDA041I read count orientation is count
13:49:24 1206:HHCDA043I cyl 0 head 0 record 2 kl 0 dl 4096 of 0
13:49:24 1206:HHCDA041I read count orientation is count
13:49:24 1206:HHCDA043I cyl 0 head 0 record 3 kl 4 dl 80 of 0
13:49:24 HHCCP075I 1206:Stat=0C00 Count=0000
13:49:24 HHCCP048I 1206:CCW=86200050 5FFA71A8=>00000000 00000000
00000000 00000000 ................
13:49:24 1206:HHCDA045I read data 80 bytes
13:49:24 HHCCP075I 1206:Stat=0C00 Count=0000 =>E5D6D3F1 F6F4F0D9
C5E2F000 00000005 VOL1640RES0.....
13:49:24 1206:end i/o bufcur 0 cache[207] waiters 0
13:49:24 HHCCP050I 1206:SCSW=00C04007 Stat=0C00 Count=0000 CCW=3FFA7330
13:49:24 1206:start i/o file[0] bufcur 0 cache[207]
13:49:24 1206:synchronous I/O ccw addr 3ffa7388
13:49:24 HHCCP048I 1206:CCW=63400010 3FFA73A0=>40C01000 00000000
00000000 00000000 {..............
13:49:24 HHCCP075I 1206:Stat=0C00 Count=0000
13:49:24 HHCCP048I 1206:CCW=47600010 3FFA73B0=>16000001 00000000
00000000 04000000 ................
13:49:24 1206:HHCDA038I seeking to cyl 0 head 0
13:49:24 1206:HHCDA041I read count orientation is index
13:49:24 1206:HHCDA043I cyl 0 head 0 record 0 kl 0 dl 8 of 0
13:49:24 1206:HHCDA041I read count orientation is count
13:49:24 1206:HHCDA043I cyl 0 head 0 record 1 kl 0 dl 24 of 0
13:49:24 1206:HHCDA041I read count orientation is count
13:49:24 1206:HHCDA043I cyl 0 head 0 record 2 kl 0 dl 4096 of 0
13:49:24 1206:HHCDA041I read count orientation is count
13:49:24 1206:HHCDA043I cyl 0 head 0 record 3 kl 4 dl 80 of 0
13:49:24 1206:HHCDA041I read count orientation is count
13:49:24 1206:HHCDA043I cyl 0 head 0 record 4 kl 0 dl 4096 of 0
13:49:24 HHCCP075I 1206:Stat=0C00 Count=0000
13:49:24 HHCCP048I 1206:CCW=86201000 3FD32000=>00000000 00000000
00000000 00000000 ................
13:49:24 1206:HHCDA045I read data 4096 bytes
13:49:24 HHCCP075I 1206:Stat=0C00 Count=0000 =>08CC8009 00000000
00000000 40000000 ............ ...
13:49:24 1206:end i/o bufcur 0 cache[207] waiters 0
13:49:24 HHCCP050I 1206:SCSW=00C04007 Stat=0C00 Count=0000 CCW=3FFA73A0
13:49:24 1206:start i/o file[0] bufcur 0 cache[207]
13:49:24 1206:synchronous I/O ccw addr 1fddd000
13:49:24 HHCCP048I 1206:CCW=E7400040 1FDDDF50=>01800000 00000000
00000000 40C01000 ............ {..
13:49:24 HHCCP075I 1206:Stat=0E40 Count=0040
13:49:24 HHCCP076I 1206:Sense=80000000 00FFFF01 00000000 00000000
00000000 00000000
13:49:24 HHCCP077I 1206:Sense=CMDREJ
13:49:24 1206:end i/o bufcur 0 cache[207] waiters 0
13:49:24 HHCCP050I 1206:SCSW=00C24017 Stat=0E40 Count=0040 CCW=1FDDD008
13:49:24 08:49:24
13:49:24 1206:start i/o file[0] bufcur 0 cache[207]
13:49:24 1206:synchronous I/O ccw addr 3fd3c000
13:49:24 HHCCP048I 1206:CCW=E7400040 3FD3CF50=>01800000 00000000
00000000 40C01000 ............ {..
13:49:24 HHCCP075I 1206:Stat=0E40 Count=0040
13:49:24 HHCCP076I 1206:Sense=80000000 00FFFF01 00000000 00000000
00000000 00000000
13:49:24 HHCCP077I 1206:Sense=CMDREJ
13:49:24 1206:end i/o bufcur 0 cache[207] waiters 0
13:49:24 HHCCP050I 1206:SCSW=00C24017 Stat=0E40 Count=0040 CCW=3FD3C008
13:49:24 08:49:24 HCPERP500I DASD 1206 AN OPERATION WAS TERMINATED
BECAUSE A
13:49:24 08:49:24 HCPERP500I COMMAND REJECT ERROR OCCURRED
13:49:24 08:49:24 HCPERP6300I SENSE DATA FORMAT = 00 MSG CODE = 01
13:49:24 08:49:24 HCPERP6301I CHANNEL COMMAND WORD COMMAND CODE = N/A HPF
13:49:24 08:49:24 HCPERP6302I SEEK ADDRESS = 000000000000
13:49:24 08:49:24 HCPERP6303I SENSE = 80000000 00FFFF01 00000000
00000000 00000000
13:49:24 08:49:24 HCPERP6303I 00000000 00000080 00000000
13:49:24 08:49:24 HCPERP6304I IRB = 00C24017 1FDDD008 0E400040 00800000
13:49:24 08:49:24 HCPERP6305I USERID = SYSTEM
13:49:24 08:49:24 HCPERP2216I CHANNEL PATH ID = 12
13:49:24 08:49:24 HCPUDS1777E The directory on volume 640RES could not
be initialized.
13:49:24 08:49:24 HCPUDS1752E No directory could be initialized.
13:49:24 08:49:24 HCPERP500I DASD 1206 AN OPERATION WAS TERMINATED
BECAUSE A
13:49:24 08:49:24 HCPERP500I COMMAND REJECT ERROR OCCURRED
13:49:24 08:49:24 HCPERP6300I SENSE DATA FORMAT = 00 MSG CODE = 01
13:49:24 08:49:24 HCPERP6301I CHANNEL COMMAND WORD COMMAND CODE = N/A HPF
13:49:24 08:49:24 HCPERP6302I SEEK ADDRESS = 000000000000
13:49:24 08:49:24 HCPERP6303I SENSE = 80000000 00FFFF01 00000000
00000000 00000000
13:49:24 08:49:24 HCPERP6303I 00000000 00000080 00000000
13:49:24 08:49:24 HCPERP6304I IRB = 00C24017 3FD3C008 0E400040 00800000
13:49:24 08:49:24 HCPERP6305I USERID = SYSTEM
13:49:24 08:49:24 HCPERP2216I CHANNEL PATH ID = 12
13:49:24 08:49:24 HCPWRM902W System recovery failure; fatal I/O error
13:49:24 08:49:24 HCPWRP959I ZVM6401 SYSTEM TERMINATION IN PROGRESS ON
2017-04-20
13:49:27 HHCCP011I CPU0000: Disabled wait state
13:49:27 PSW=00020000 00000000 0000000000000902
Am 27.03.2017 um 14:26 schrieb Franz Josef Pohlen
Post by Franz Josef Pohlen fjpohlen-***@gmx.de [hercules-390]
Hello Ivan,
I have tried your recommendation ARCHLVL ENABLE BIT44. The msg
HCPRFI9030W doesn't appear any longer but now after the standalone
loader screen and PF10 there is an X SYSTEM in the emulation window and
suddenly afterwards a PROG708. This means that an SNA msg was received
before the begin of the data transmission. I use Personal Communication
as a console emulation as always and had never problems before.
Any help is welcome.
--
kind regards
Franz Josef Pohlen


------------------------------------

------------------------------------

Community email addresses:
Post message: hercules-***@yahoogroups.com
Subscribe: hercules-390-***@yahoogroups.com
Unsubscribe: hercules-390-***@yahoogroups.com
List owner: hercules-390-***@yahoogroups.com

Files and archives at:
http://groups.yahoo.com/group/hercules-390

Get the latest version of Hercules from:
http://www.hercules-390.org


------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/hercules-390/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/hercules-390/join
(Yahoo! ID required)

<*> To change settings via email:
hercules-390-***@yahoogroups.com
hercules-390-***@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
hercules-390-***@yahoogroups.com

<*> Your use of Yahoo Groups is subject to:
https://info.yahoo.com/legal/us/yahoo/utos/terms/
Harold Grovesteen h.grovsteen@tx.rr.com [hercules-390]
2017-04-21 15:01:44 UTC
Permalink
Entirely possible. Could be implying a level of functionality not
available with Hercules. How to get the OS to do something else is way
beyond my personal knowledge. Perhaps a CU model number as opposed to
omitting it might help or a change to the CU type. Just speculation.

The documentation I have that does not have this command is for storage
servers 2105 models E10, E20, F10 and F20. If you could get the OS to
think the DASD is on one of these control units, it might change the
behavior.

In the CCW trace, the volume label was successfully read. So, it is
possible that there is something in the volume label that is also
causing the behavior. I personally think that is a stretch, but it is
possible.

The trace does not contain the IPL commands, so it would seem that the
trace was started after the IPL. So it is possible that the contents of
SENSE ID (device and CU type and model numbers) or READ DEVICE
CHARACTERISTICS (neither in the trace) is leading to the unsupported
commands.

Harold Grovesteen


On Fri, 2017-04-21 at 16:19 +0200, Franz Josef Pohlen
Post by Franz Josef Pohlen fjpohlen-***@gmx.de [hercules-390]
I have just seen this VM message in the log after the command reject.
HCPERP6301I CHANNEL COMMAND WORD COMMAND CODE = N/A HPF
I wonder if the word HPF may point to a check of zVM if High Perfomance Ficon is available and Hercules doesn't react on this as expected.
Am 21.04.2017 um 14:35 schrieb Franz Josef Pohlen
Post by Franz Josef Pohlen fjpohlen-***@gmx.de [hercules-390]
Hello all,
as the Hercules 4.0 doesn't seem to be working for the current zvm. I
will try to get the zvm 6.4 running with Hercules 3.12 (Win 64Bit). I
get an error during IPL after I have confirmed the time question. It
cancels with command reject on the IPL device. For documentation I have
started a ccw trace on the ipl device and ipled the zvm 6.4 with
cons=sysc. So the zVM messages and the ccw trace is in the log. I hope
that someone of you developers can see there what's going wrong. My old
zvm 6.3 starts without problems on this hercules configuration. I have
also attached my hercules config. There might still be some settings for
Hercules 4.0 but they were ignored during start with Hercules 3.12.
Thanks in advance for your help and have a nice weekend
Franz Josef
Hercules Config
1206 3390 E:/daten/ipl390/dasd/640res.zvm cu=3990
sf=E:/daten/ipl390/dasd/640res_1.zvm
Franz Josef Pohlen fjpohlen-maillist@gmx.de [hercules-390]
2017-04-21 15:45:57 UTC
Permalink
It is only a snip of the log. The whole log is more than 30000 records
(2,5 mb). Zipped it is only 240k but I think the list server does not
support attachments. So where I can send or upload the complete log?
Post by Harold Grovesteen ***@tx.rr.com [hercules-390]
Entirely possible. Could be implying a level of functionality not
available with Hercules. How to get the OS to do something else is way
beyond my personal knowledge. Perhaps a CU model number as opposed to
omitting it might help or a change to the CU type. Just speculation.
The documentation I have that does not have this command is for storage
servers 2105 models E10, E20, F10 and F20. If you could get the OS to
think the DASD is on one of these control units, it might change the
behavior.
In the CCW trace, the volume label was successfully read. So, it is
possible that there is something in the volume label that is also
causing the behavior. I personally think that is a stretch, but it is
possible.
The trace does not contain the IPL commands, so it would seem that the
trace was started after the IPL. So it is possible that the contents of
SENSE ID (device and CU type and model numbers) or READ DEVICE
CHARACTERISTICS (neither in the trace) is leading to the unsupported
commands.
Harold Grovesteen
On Fri, 2017-04-21 at 16:19 +0200, Franz Josef Pohlen
Post by Franz Josef Pohlen fjpohlen-***@gmx.de [hercules-390]
I have just seen this VM message in the log after the command reject.
HCPERP6301I CHANNEL COMMAND WORD COMMAND CODE = N/A HPF
I wonder if the word HPF may point to a check of zVM if High Perfomance Ficon is available and Hercules doesn't react on this as expected.
Am 21.04.2017 um 14:35 schrieb Franz Josef Pohlen
Post by Franz Josef Pohlen fjpohlen-***@gmx.de [hercules-390]
Hello all,
as the Hercules 4.0 doesn't seem to be working for the current zvm. I
will try to get the zvm 6.4 running with Hercules 3.12 (Win 64Bit). I
get an error during IPL after I have confirmed the time question. It
cancels with command reject on the IPL device. For documentation I have
started a ccw trace on the ipl device and ipled the zvm 6.4 with
cons=sysc. So the zVM messages and the ccw trace is in the log. I hope
that someone of you developers can see there what's going wrong. My old
zvm 6.3 starts without problems on this hercules configuration. I have
also attached my hercules config. There might still be some settings for
Hercules 4.0 but they were ignored during start with Hercules 3.12.
Thanks in advance for your help and have a nice weekend
Franz Josef
Hercules Config
1206 3390 E:/daten/ipl390/dasd/640res.zvm cu=3990
sf=E:/daten/ipl390/dasd/640res_1.zvm
------------------------------------
------------------------------------
http://groups.yahoo.com/group/hercules-390
http://www.hercules-390.org
------------------------------------
Yahoo Groups Links
--
kind regards
Franz Josef Pohlen
Franz Josef Pohlen fjpohlen-maillist@gmx.de [hercules-390]
2017-04-21 16:11:18 UTC
Permalink
Hello Harold,

I have tried to change the CU to 3990-3 and on a second try to 3990-3
and the parameter syncio but nothing helps. The 2105 CU is not accepted
(type not in dasd table). The documentaion says that 3390 devices need
3990 CU. You can only select between 3990-3 and 3990-6. Nothing helps
unfortunately.

Am 21.04.2017 um 17:45 schrieb Franz Josef Pohlen
Post by Franz Josef Pohlen fjpohlen-***@gmx.de [hercules-390]
It is only a snip of the log. The whole log is more than 30000 records
(2,5 mb). Zipped it is only 240k but I think the list server does not
support attachments. So where I can send or upload the complete log?
Post by Harold Grovesteen ***@tx.rr.com [hercules-390]
Entirely possible. Could be implying a level of functionality not
available with Hercules. How to get the OS to do something else is way
beyond my personal knowledge. Perhaps a CU model number as opposed to
omitting it might help or a change to the CU type. Just speculation.
The documentation I have that does not have this command is for storage
servers 2105 models E10, E20, F10 and F20. If you could get the OS to
think the DASD is on one of these control units, it might change the
behavior.
In the CCW trace, the volume label was successfully read. So, it is
possible that there is something in the volume label that is also
causing the behavior. I personally think that is a stretch, but it is
possible.
The trace does not contain the IPL commands, so it would seem that the
trace was started after the IPL. So it is possible that the contents of
SENSE ID (device and CU type and model numbers) or READ DEVICE
CHARACTERISTICS (neither in the trace) is leading to the unsupported
commands.
Harold Grovesteen
On Fri, 2017-04-21 at 16:19 +0200, Franz Josef Pohlen
Post by Franz Josef Pohlen fjpohlen-***@gmx.de [hercules-390]
I have just seen this VM message in the log after the command reject.
HCPERP6301I CHANNEL COMMAND WORD COMMAND CODE = N/A HPF
I wonder if the word HPF may point to a check of zVM if High Perfomance Ficon is available and Hercules doesn't react on this as expected.
Am 21.04.2017 um 14:35 schrieb Franz Josef Pohlen
Post by Franz Josef Pohlen fjpohlen-***@gmx.de [hercules-390]
Hello all,
as the Hercules 4.0 doesn't seem to be working for the current zvm. I
will try to get the zvm 6.4 running with Hercules 3.12 (Win 64Bit). I
get an error during IPL after I have confirmed the time question. It
cancels with command reject on the IPL device. For documentation I have
started a ccw trace on the ipl device and ipled the zvm 6.4 with
cons=sysc. So the zVM messages and the ccw trace is in the log. I hope
that someone of you developers can see there what's going wrong. My old
zvm 6.3 starts without problems on this hercules configuration. I have
also attached my hercules config. There might still be some settings for
Hercules 4.0 but they were ignored during start with Hercules 3.12.
Thanks in advance for your help and have a nice weekend
Franz Josef
Hercules Config
1206 3390 E:/daten/ipl390/dasd/640res.zvm cu=3990
sf=E:/daten/ipl390/dasd/640res_1.zvm
------------------------------------
------------------------------------
http://groups.yahoo.com/group/hercules-390
http://www.hercules-390.org
------------------------------------
Yahoo Groups Links
--
kind regards
Franz Josef Pohlen
'John P. Hartmann' jphartmann@gmail.com [hercules-390]
2017-04-21 16:24:09 UTC
Permalink
2105 is a shark. I never got that to work with P390/Linux. I'm not
surprised you cannot either.
Post by Franz Josef Pohlen fjpohlen-***@gmx.de [hercules-390]
Hello Harold,
I have tried to change the CU to 3990-3 and on a second try to 3990-3
and the parameter syncio but nothing helps. The 2105 CU is not accepted
(type not in dasd table). The documentaion says that 3390 devices need
3990 CU. You can only select between 3990-3 and 3990-6. Nothing helps
unfortunately.
Am 21.04.2017 um 17:45 schrieb Franz Josef Pohlen
Aaron Finerman arfinerman@gmail.com [hercules-390]
2017-04-21 16:47:47 UTC
Permalink
Hi, This is related to Transport Mode I/O (ORB Byte 5, Bit x'04'). CCW
X'E7' is the 'Prefix' command and valid for ECKD in Command mode.
Best regards,

On Fri, Apr 21, 2017 at 12:11 PM, Franz Josef Pohlen
Post by Franz Josef Pohlen fjpohlen-***@gmx.de [hercules-390]
Hello Harold,
I have tried to change the CU to 3990-3 and on a second try to 3990-3
and the parameter syncio but nothing helps. The 2105 CU is not accepted
(type not in dasd table). The documentaion says that 3390 devices need
3990 CU. You can only select between 3990-3 and 3990-6. Nothing helps
unfortunately.
Am 21.04.2017 um 17:45 schrieb Franz Josef Pohlen
Post by Franz Josef Pohlen fjpohlen-***@gmx.de [hercules-390]
It is only a snip of the log. The whole log is more than 30000 records
(2,5 mb). Zipped it is only 240k but I think the list server does not
support attachments. So where I can send or upload the complete log?
Entirely possible. Could be implying a level of functionality not
available with Hercules. How to get the OS to do something else is way
beyond my personal knowledge. Perhaps a CU model number as opposed to
omitting it might help or a change to the CU type. Just speculation.
The documentation I have that does not have this command is for storage
servers 2105 models E10, E20, F10 and F20. If you could get the OS to
think the DASD is on one of these control units, it might change the
behavior.
In the CCW trace, the volume label was successfully read. So, it is
possible that there is something in the volume label that is also
causing the behavior. I personally think that is a stretch, but it is
possible.
The trace does not contain the IPL commands, so it would seem that the
trace was started after the IPL. So it is possible that the contents of
SENSE ID (device and CU type and model numbers) or READ DEVICE
CHARACTERISTICS (neither in the trace) is leading to the unsupported
commands.
Harold Grovesteen
On Fri, 2017-04-21 at 16:19 +0200, Franz Josef Pohlen
Post by Franz Josef Pohlen fjpohlen-***@gmx.de [hercules-390]
I have just seen this VM message in the log after the command reject.
HCPERP6301I CHANNEL COMMAND WORD COMMAND CODE = N/A HPF
I wonder if the word HPF may point to a check of zVM if High
Perfomance Ficon is available and Hercules doesn't react on this as
expected.
Post by Franz Josef Pohlen fjpohlen-***@gmx.de [hercules-390]
Post by Franz Josef Pohlen fjpohlen-***@gmx.de [hercules-390]
Am 21.04.2017 um 14:35 schrieb Franz Josef Pohlen
Post by Franz Josef Pohlen fjpohlen-***@gmx.de [hercules-390]
Hello all,
as the Hercules 4.0 doesn't seem to be working for the current
zvm. I
Post by Franz Josef Pohlen fjpohlen-***@gmx.de [hercules-390]
Post by Franz Josef Pohlen fjpohlen-***@gmx.de [hercules-390]
Post by Franz Josef Pohlen fjpohlen-***@gmx.de [hercules-390]
will try to get the zvm 6.4 running with Hercules 3.12 (Win
64Bit). I
Post by Franz Josef Pohlen fjpohlen-***@gmx.de [hercules-390]
Post by Franz Josef Pohlen fjpohlen-***@gmx.de [hercules-390]
Post by Franz Josef Pohlen fjpohlen-***@gmx.de [hercules-390]
get an error during IPL after I have confirmed the time question.
It
Post by Franz Josef Pohlen fjpohlen-***@gmx.de [hercules-390]
Post by Franz Josef Pohlen fjpohlen-***@gmx.de [hercules-390]
Post by Franz Josef Pohlen fjpohlen-***@gmx.de [hercules-390]
cancels with command reject on the IPL device. For documentation I
have
Post by Franz Josef Pohlen fjpohlen-***@gmx.de [hercules-390]
Post by Franz Josef Pohlen fjpohlen-***@gmx.de [hercules-390]
Post by Franz Josef Pohlen fjpohlen-***@gmx.de [hercules-390]
started a ccw trace on the ipl device and ipled the zvm 6.4 with
cons=sysc. So the zVM messages and the ccw trace is in the log. I
hope
Post by Franz Josef Pohlen fjpohlen-***@gmx.de [hercules-390]
Post by Franz Josef Pohlen fjpohlen-***@gmx.de [hercules-390]
Post by Franz Josef Pohlen fjpohlen-***@gmx.de [hercules-390]
that someone of you developers can see there what's going wrong.
My old
Post by Franz Josef Pohlen fjpohlen-***@gmx.de [hercules-390]
Post by Franz Josef Pohlen fjpohlen-***@gmx.de [hercules-390]
Post by Franz Josef Pohlen fjpohlen-***@gmx.de [hercules-390]
zvm 6.3 starts without problems on this hercules configuration. I
have
Post by Franz Josef Pohlen fjpohlen-***@gmx.de [hercules-390]
Post by Franz Josef Pohlen fjpohlen-***@gmx.de [hercules-390]
Post by Franz Josef Pohlen fjpohlen-***@gmx.de [hercules-390]
also attached my hercules config. There might still be some
settings for
Post by Franz Josef Pohlen fjpohlen-***@gmx.de [hercules-390]
Post by Franz Josef Pohlen fjpohlen-***@gmx.de [hercules-390]
Post by Franz Josef Pohlen fjpohlen-***@gmx.de [hercules-390]
Hercules 4.0 but they were ignored during start with Hercules 3.12.
Thanks in advance for your help and have a nice weekend
Franz Josef
Hercules Config
1206 3390 E:/daten/ipl390/dasd/640res.zvm cu=3990
sf=E:/daten/ipl390/dasd/640res_1.zvm
------------------------------------
------------------------------------
http://groups.yahoo.com/group/hercules-390
http://www.hercules-390.org
------------------------------------
Yahoo Groups Links
--
kind regards
Franz Josef Pohlen
crc@alce1.tuttopmi.it [hercules-390]
2017-04-26 08:54:45 UTC
Permalink
Hi Franz,

as I said I can IPL z/VM 6.4 in Hercules 3.12 without any problem.

My environment: Windows/XP - Hercules 3.12 (of course 32 bit) -
VMCOM1 : 1000
M01RES : 1002 (ipl device)

this is the snip of the trace: as you can see the directory is brought online and there's no evidence of the CCW E7 that causes a command reject in your system.
...............................................................................................................
03:35:07 z/VM V6 R4.0 SERVICE LEVEL 1601 (64-BIT)
03:35:07 SYSTEM NUCLEUS CREATED ON 2017-02-09 AT 15:28:23, LOADED FROM M01RES
03:35:07
03:35:07 ****************************************************************
03:35:07 * LICENSED MATERIALS - PROPERTY OF IBM* *
03:35:07 * *
03:35:07 * 5741-A07 (C) COPYRIGHT IBM CORP. 1983, 2016. ALL RIGHTS *
03:35:07 * RESERVED. US GOVERNMENT USERS RESTRICTED RIGHTS - USE, *
03:35:07 * DUPLICATION OR DISCLOSURE RESTRICTED BY GSA ADP SCHEDULE *
03:35:07 * CONTRACT WITH IBM CORP. *
03:35:07 * *
03:35:07 * * TRADEMARK OF INTERNATIONAL BUSINESS MACHINES. *
03:35:07 ****************************************************************
03:35:07
03:35:07 HCPZCO6718I Using parm disk 1 on volume VMCOM1 (device 1000).
03:35:07 HCPZCO6718I Parm disk resides on cylinders 1 through 120.
1002:start i/o file[1] bufcur 0 cache[29]
1002:synchronous I/O ccw addr 18a9c2a8
HHCCP048I 1002:CCW=63400010 18A9C2C0=>40C00050 00000000 00000000 00000000 {.&............
HHCCP075I 1002:Stat=0C00 Count=0000
HHCCP048I 1002:CCW=47600010 18A9C2D0=>16000001 00000000 00000000 03000000 ................
1002:HHCDA038I seeking to cyl 0 head 0
1002:HHCDA041I read count orientation is index
1002:HHCDA043I cyl 0 head 0 record 0 kl 0 dl 8 of 0
1002:HHCDA041I read count orientation is count
1002:HHCDA043I cyl 0 head 0 record 1 kl 0 dl 24 of 0
1002:HHCDA041I read count orientation is count
1002:HHCDA043I cyl 0 head 0 record 2 kl 0 dl 4096 of 0
1002:HHCDA041I read count orientation is count
1002:HHCDA043I cyl 0 head 0 record 3 kl 4 dl 80 of 0
HHCCP075I 1002:Stat=0C00 Count=0000
HHCCP048I 1002:CCW=86200050 18A9D0D8=>00000000 00000000 00000000 00000000 ................
1002:HHCDA045I read data 80 bytes
HHCCP075I 1002:Stat=0C00 Count=0000 =>E5D6D3F1 D4F0F1D9 C5E2F000 00000005 VOL1M01RES0.....
1002:end i/o bufcur 0 cache[29] waiters 0
HHCCP050I 1002:SCSW=00C04007 Stat=0C00 Count=0000 CCW=18A9C2C0
1002:start i/o file[1] bufcur 0 cache[29]
1002:synchronous I/O ccw addr 18a9c318
HHCCP048I 1002:CCW=63400010 18A9C330=>40C01000 00000000 00000000 00000000 {..............
HHCCP075I 1002:Stat=0C00 Count=0000
HHCCP048I 1002:CCW=47600010 18A9C340=>16000001 00000000 00000000 04000000 ................
1002:HHCDA038I seeking to cyl 0 head 0
1002:HHCDA041I read count orientation is index
1002:HHCDA043I cyl 0 head 0 record 0 kl 0 dl 8 of 0
1002:HHCDA041I read count orientation is count
1002:HHCDA043I cyl 0 head 0 record 1 kl 0 dl 24 of 0
1002:HHCDA041I read count orientation is count
1002:HHCDA043I cyl 0 head 0 record 2 kl 0 dl 4096 of 0
1002:HHCDA041I read count orientation is count
1002:HHCDA043I cyl 0 head 0 record 3 kl 4 dl 80 of 0
1002:HHCDA041I read count orientation is count
1002:HHCDA043I cyl 0 head 0 record 4 kl 0 dl 4096 of 0
HHCCP075I 1002:Stat=0C00 Count=0000
HHCCP048I 1002:CCW=86201000 182DA000=>00000000 00000000 00000000 00000000 ................
1002:HHCDA045I read data 4096 bytes
HHCCP075I 1002:Stat=0C00 Count=0000 =>08CC8008 00000000 00000000 C0000000 ............{...
1002:end i/o bufcur 0 cache[29] waiters 0
HHCCP050I 1002:SCSW=00C04007 Stat=0C00 Count=0000 CCW=18A9C330
1002:start i/o file[1] bufcur 0 cache[29]
1002:synchronous I/O ccw addr 18b68050
HHCCP048I 1002:CCW=63400010 18B65A20=>80C01000 00000000 00000000 2720000E .{..............
HHCCP075I 1002:Stat=0C00 Count=0000
HHCCP048I 1002:CCW=47400010 18B68040=>16000001 00010000 00010000 02180000 ................
1002:HHCDA038I seeking to cyl 1 head 0
1002:read trk 15 (synchronous)
1002:0 rdtrk 15
1002:0 rdtrk[44] 15 syncio cache miss
1002:asynchronous I/O ccw addr 18b68058
HHCCP048I 1002:CCW=47400010 18B68040=>16000001 00010000 00010000 02180000 ................
1002:HHCDA038I seeking to cyl 1 head 0
1002:read trk 15 (asynchronous)
1002:0 rdtrk 15
1002:0 rdtrk[44] 15 cache miss
1002:0 rdtrk[44] 15 dropping 1002:1389 from cache
1002:0 rdtrk[44] 15 buf 226FCC98 len 56832
1002:trk[15] read_trkimg
1002:file[1] l2[0,15] trk[15] read_l2ent 0xffffffff
1002:file[0] l2[0,15] trk[15] read_l2ent 0xd2c
1002:file[0] read_l2 0 active 0 0 0
1002:file[0] l2[0,15] trk[15] read_l2ent 0x678de8 5382 5382
1002:file[0] fd[18] read, off 0x678de8 len 5382
1002:0 rdtrk[44] 15 complete buf 226FCC98:0100010000
1002:uncompress comp 1 len 5382 maxlen 56832 trk 15
1002:uncompress zlib newlen 49277 rc 0
1002:validating trk 15 len 49277 0000010000 0001000000000008
1002:read trk 15 uncompressed len 49277
1002:HHCDA041I read count orientation is index
1002:HHCDA043I cyl 1 head 0 record 0 kl 0 dl 8 of 0
1002:HHCDA041I read count orientation is count
1002:HHCDA043I cyl 1 head 0 record 1 kl 0 dl 4096 of 0
1002:HHCDA041I read count orientation is count
1002:HHCDA043I cyl 1 head 0 record 2 kl 0 dl 4096 of 0
HHCCP075I 1002:Stat=0C00 Count=0000
HHCCP048I 1002:CCW=86441000 18B68070=>00000000 182D9000 00000001 80E1CE00 ................
1002:HHCDA045I read data 4096 bytes
HHCCP064I 1002:IDAW=00000000182D9000 Len=1000
1002:---------------------=>00000330 01020000 C4C9D9C5 C3E3D6D9 ........DIRECTOR
HHCCP075I 1002:Stat=0C00 Count=0000 =>00000000 182D9000 00000001 80E1CE00 ................
HHCCP048I 1002:CCW=03020000 18B680A0=>20441000 18B680B0 03200000 18B680E0 ...............\
1002:end i/o bufcur 15 cache[44] waiters 0
HHCCP073I Device 1002 suspended
HHCCP050I 1002:SCSW=08C04029 Stat=0000 Count=0000 CCW=18B68070
HHCCP074I Device 1002 resumed
HHCCP062I 1002: Resume subchannel: cc=0
1002:start i/o file[1] bufcur 15 cache[44]
HHCCP048I 1002:CCW=08000000 18B68090=>63400010 18B65A20 47400010 18B68080 . ....!.. ......
HHCCP048I 1002:CCW=63400010 18B65A20=>80C01000 00000000 00000000 2720000E .{..............
HHCCP075I 1002:Stat=0C00 Count=0000
HHCCP048I 1002:CCW=47400010 18B68080=>16000001 00010000 00010000 02180000 ................
1002:HHCDA038I seeking to cyl 1 head 0
1002:HHCDA041I read count orientation is index
1002:HHCDA043I cyl 1 head 0 record 0 kl 0 dl 8 of 0
1002:HHCDA041I read count orientation is count
1002:HHCDA043I cyl 1 head 0 record 1 kl 0 dl 4096 of 0
1002:HHCDA041I read count orientation is count
1002:HHCDA043I cyl 1 head 0 record 2 kl 0 dl 4096 of 0
HHCCP075I 1002:Stat=0C00 Count=0000
HHCCP048I 1002:CCW=86441000 18B680B0=>00000000 07DF3000 00000001 80E1CE00 ................
1002:HHCDA045I read data 4096 bytes
HHCCP064I 1002:IDAW=0000000007DF3000 Len=1000
1002:---------------------=>00000330 01020000 C4C9D9C5 C3E3D6D9 ........DIRECTOR
HHCCP075I 1002:Stat=0C00 Count=0000 =>00000000 07DF3000 00000001 80E1CE00 ................
HHCCP048I 1002:CCW=03020000 18B680E0=>20441000 18B680F0 03200000 18B68120 .......0......a.
1002:end i/o bufcur 15 cache[44] waiters 0
HHCCP073I Device 1002 suspended
HHCCP050I 1002:SCSW=08C04029 Stat=0000 Count=0000 CCW=18B680B0
HHCCP062I 1002: Resume subchannel: cc=0
HHCCP074I Device 1002 resumed
1002:start i/o file[1] bufcur 15 cache[44]
HHCCP048I 1002:CCW=08000000 18B680D0=>63400010 18B65A20 47400010 18B680C0 . ....!.. .....{
HHCCP048I 1002:CCW=63400010 18B65A20=>80C01000 00000000 00000000 2720000E .{..............
HHCCP075I 1002:Stat=0C00 Count=0000
HHCCP048I 1002:CCW=47400010 18B680C0=>16000001 00010000 00010000 01060000 ................
1002:HHCDA038I seeking to cyl 1 head 0
1002:HHCDA041I read count orientation is index
1002:HHCDA043I cyl 1 head 0 record 0 kl 0 dl 8 of 0
1002:HHCDA041I read count orientation is count
1002:HHCDA043I cyl 1 head 0 record 1 kl 0 dl 4096 of 0
HHCCP075I 1002:Stat=0C00 Count=0000
HHCCP048I 1002:CCW=86441000 18B680F0=>00000000 182D9000 00000001 80F00A00 .............0..
1002:HHCDA045I read data 4096 bytes
HHCCP064I 1002:IDAW=00000000182D9000 Len=1000
1002:---------------------=>00000000 00010000 C4C9D9C5 C3E3D6D9 ........DIRECTOR
HHCCP075I 1002:Stat=0C00 Count=0000 =>00000000 182D9000 00000001 80F00A00 .............0..
HHCCP048I 1002:CCW=03020000 18B68120=>20441000 18B68130 03200000 18B68160 ......a.......a-
1002:end i/o bufcur 15 cache[44] waiters 0
HHCCP073I Device 1002 suspended
HHCCP050I 1002:SCSW=08C04029 Stat=0000 Count=0000 CCW=18B680F0
HHCCP062I 1002: Resume subchannel: cc=0
HHCCP074I Device 1002 resumed
1002:start i/o file[1] bufcur 15 cache[44]
HHCCP048I 1002:CCW=08000000 18B68110=>63400010 18B65A20 47400010 18B68100 . ....!.. ....a.
HHCCP048I 1002:CCW=63400010 18B65A20=>80C01000 00000000 00000000 2720000E .{..............
HHCCP075I 1002:Stat=0C00 Count=0000
HHCCP048I 1002:CCW=47400010 18B68100=>16000001 00010000 00010000 03290000 ................
1002:HHCDA038I seeking to cyl 1 head 0
1002:HHCDA041I read count orientation is index
1002:HHCDA043I cyl 1 head 0 record 0 kl 0 dl 8 of 0
1002:HHCDA041I read count orientation is count
1002:HHCDA043I cyl 1 head 0 record 1 kl 0 dl 4096 of 0
1002:HHCDA041I read count orientation is count
1002:HHCDA043I cyl 1 head 0 record 2 kl 0 dl 4096 of 0
1002:HHCDA041I read count orientation is count
1002:HHCDA043I cyl 1 head 0 record 3 kl 0 dl 4096 of 0
HHCCP075I 1002:Stat=0C00 Count=0000
HHCCP048I 1002:CCW=86441000 18B68130=>00000000 07DF3000 00000001 80F00A00 .............0..
1002:HHCDA045I read data 4096 bytes
HHCCP064I 1002:IDAW=0000000007DF3000 Len=1000
1002:---------------------=>00000000 00010000 D7D6E2C9 E740E4C9 ........POSIX UI
HHCCP075I 1002:Stat=0C00 Count=0000 =>00000000 07DF3000 00000001 80F00A00 .............0..
HHCCP048I 1002:CCW=03020000 18B68160=>20441000 18B68170 03200000 18B681A0 ......a.......a.
1002:end i/o bufcur 15 cache[44] waiters 0
HHCCP073I Device 1002 suspended
HHCCP050I 1002:SCSW=08C04029 Stat=0000 Count=0000 CCW=18B68130
HHCCP062I 1002: Resume subchannel: cc=0
HHCCP074I Device 1002 resumed
1002:start i/o file[1] bufcur 15 cache[44]
HHCCP048I 1002:CCW=08000000 18B68150=>63400010 18B65A20 47400010 18B68140 . ....!.. ....a
HHCCP048I 1002:CCW=63400010 18B65A20=>80C01000 00000000 00000000 2720000E .{..............
HHCCP075I 1002:Stat=0C00 Count=0000
HHCCP048I 1002:CCW=47400010 18B68140=>16000001 00010000 00010000 043B0000 ................
1002:HHCDA038I seeking to cyl 1 head 0
1002:HHCDA041I read count orientation is index
1002:HHCDA043I cyl 1 head 0 record 0 kl 0 dl 8 of 0
1002:HHCDA041I read count orientation is count
1002:HHCDA043I cyl 1 head 0 record 1 kl 0 dl 4096 of 0
1002:HHCDA041I read count orientation is count
1002:HHCDA043I cyl 1 head 0 record 2 kl 0 dl 4096 of 0
1002:HHCDA041I read count orientation is count
1002:HHCDA043I cyl 1 head 0 record 3 kl 0 dl 4096 of 0
1002:HHCDA041I read count orientation is count
1002:HHCDA043I cyl 1 head 0 record 4 kl 0 dl 4096 of 0
HHCCP075I 1002:Stat=0C00 Count=0000
HHCCP048I 1002:CCW=86441000 18B68170=>00000000 182D9000 00000001 80F00A00 .............0..
1002:HHCDA045I read data 4096 bytes
HHCCP064I 1002:IDAW=00000000182D9000 Len=1000
1002:---------------------=>00000000 00090000 D7D6E2C9 E740C7C9 ........POSIX GI
HHCCP075I 1002:Stat=0C00 Count=0000 =>00000000 182D9000 00000001 80F00A00 .............0..
HHCCP048I 1002:CCW=03020000 18B681A0=>20441000 18B681B0 03200000 18B681E0 ......a.......a\
1002:end i/o bufcur 15 cache[44] waiters 0
HHCCP073I Device 1002 suspended
HHCCP050I 1002:SCSW=08C04029 Stat=0000 Count=0000 CCW=18B68170
HHCCP062I 1002: Resume subchannel: cc=0
HHCCP074I Device 1002 resumed
1002:start i/o file[1] bufcur 15 cache[44]
HHCCP048I 1002:CCW=08000000 18B68190=>63400010 18B65A20 47400010 18B68180 . ....!.. ....a.
HHCCP048I 1002:CCW=63400010 18B65A20=>80C01000 00000000 00000000 2720000E .{..............
HHCCP075I 1002:Stat=0C00 Count=0000
HHCCP048I 1002:CCW=47400010 18B68180=>16000001 00150000 00150000 01060000 ................
1002:HHCDA038I seeking to cyl 21 head 0
1002:read trk 315 (asynchronous)
1002:0 rdtrk 315
1002:0 rdtrk[115] 315 cache miss
1002:0 rdtrk[115] 315 dropping 1002:1231 from cache
1002:0 rdtrk[115] 315 buf 230F0048 len 56832
1002:trk[315] read_trkimg
1002:file[1] l2[1,59] trk[315] read_l2ent 0xd2c
1002:file[1] read_l2 1 active 0 0 0
1002:l2[1,1] cache[799] miss
1002:file[1] fd[19] read, off 0xd2c len 2048
1002:file[1] cache[799] l2[1] read offset 0xd2c
1002:file[1] l2[1,59] trk[315] read_l2ent 0x29eb9 1422 1422
1002:file[1] fd[19] read, off 0x29eb9 len 1422
1002:0 rdtrk[115] 315 complete buf 230F0048:0100150000
1002:uncompress comp 1 len 1422 maxlen 56832 trk 315
1002:uncompress zlib newlen 49277 rc 0
1002:validating trk 315 len 49277 0000150000 0015000000000008
1002:read trk 315 uncompressed len 49277
1002:HHCDA041I read count orientation is index
1002:HHCDA043I cyl 21 head 0 record 0 kl 0 dl 8 of 0
1002:HHCDA041I read count orientation is count
1002:HHCDA043I cyl 21 head 0 record 1 kl 0 dl 4096 of 0
HHCCP075I 1002:Stat=0C00 Count=0000
HHCCP048I 1002:CCW=86441000 18B681B0=>00000000 07DF1000 00000001 80F02E00 .............0..
1002:HHCDA045I read data 4096 bytes
HHCCP064I 1002:IDAW=0000000007DF1000 Len=1000
1002:---------------------=>C8C3D7C3 D2D7C2D2 00000000 00000000 HCPCKPBK........
HHCCP075I 1002:Stat=0C00 Count=0000 =>00000000 07DF1000 00000001 80F02E00 .............0..
HHCCP048I 1002:CCW=03020000 18B681E0=>20441000 18B681F0 03200000 18B68220 ......a0......b.
1002:end i/o bufcur 315 cache[115] waiters 0
HHCCP073I Device 1002 suspended
HHCCP050I 1002:SCSW=08C04029 Stat=0000 Count=0000 CCW=18B681B0
03:35:07 The directory on volume M01RES at address 1002 has been brought online.
.................................................................................................................................
I'm available for further tests if you like :-)

Regards

Paul
will_fashion@yahoo.fr [hercules-390]
2017-05-31 08:47:50 UTC
Permalink
hello all,

exactly the same problem.
any fix?
what is the config file of the hercules 3.12 XP (32 bits) successfull ipl?


regards
Franz Josef Pohlen fjpohlen-maillist@gmx.de [hercules-390]
2017-05-31 12:12:07 UTC
Permalink
Post by ***@yahoo.fr [hercules-390]
hello all,
exactly the same problem.
any fix?
what is the config file of the hercules 3.12 XP (32 bits) successfull ipl?
regards
--
kind regards
Franz Josef Pohlen
crc@alce1.tuttopmi.it [hercules-390]
2017-06-01 16:06:34 UTC
Permalink
Hi,
I can IPL z/VM 6.4 with Hercules 3.09 - 3.11 - 3.12 (Windows XP)

Not tested with Hercules 3.10 but I bet it will be OK :)

With Hyperion (version 8213)I get a PRG004 after the first messages on the console

Here's my config file:
-----------------------------------------------------------------------------
#
# Hercules Emulator Control file - z/VM 6.4 ...

#

# System parameters
#

# definitions for Hercules 3.12 or Hercules 4.0 (Hyperion)

# definitions for Hercules 3.12
ARCHMODE Z/ARCH # Architecture mode


# definitions for Hyperion
# ARCHLVL z/Arch
# ARCHLVL ENABLE STFL_EXTENDED
# ARCHLVL ENABLE ASN_LX_REUSE
# ARCHLVL ENABLE bit44



DEFSYM CU3390 "cu=3990"

CNSLPORT 3270
CONKPALV (3,1,10)
CPUMODEL 2096
CPUSERIAL 01131C
ECPSVM NO
#HTTPPORT 8081
LOADPARM 001F....
LPARNAME ZVM64
MAINSIZE 396
MOUNTED_TAPE_REINIT DISALLOW
NUMCPU 3
OSTAILOR VM
PANRATE 50
PGMPRDOS LICENSED
SHCMDOPT NODIAG8
SYSEPOCH 1900
TIMERINT 50
TZOFFSET -0000
XPNDSIZE 128
YROFFSET 0

HERCPRIO 0
TODPRIO -20
DEVPRIO 8
CPUPRIO 15
CCKD ra=9,raq=16,rat=16,wr=8,gcparm=4
# Card Readers

000C 3505

# Card Punches

000D 3525 Q:/ZVM-6-1-Dave/punch00d.txt ascii crlf

# Line Printers

000E 3211 Q:/ZVM-6-1-Dave/print00e.txt crlf

# Integrated 3270 terminal
#0000 SYSG

# Display Terminals

# 001F 3270 *
0020 3270
0021 3270
0022 3270
0023 3270



# DASD Devices Z/VM 6.1 x STARTER Z/VM 6.4

200 3390 Q:/zVM-6.4/1000.dasd.cckd ro sf=q:/zVM-6.4/shadow/1000.dasd_1 #cu=3990
201 3390 Q:/zVM-6.4/1001.dasd.cckd ro sf=q:/zVM-6.4/shadow/2000.dasd_1 #cu=3990
202 3390 Q:/zVM-6.4/1002.dasd.cckd ro sf=q:/zVM-6.4/shadow/3000.dasd_1 #cu=3990

# DASD Devices z/VM 6.4 - original addresses (VMCOM1 must be 1000 - SYSTEM.CONFIG is in minidisk CF0)

1000 3390 Q:/zVM-6.4/VMCOM1.CCKD ro sf=q:/zVM-6.4/shadow/vmcom1_1 #cu=3990
1001 3390 Q:/zVM-6.4/640RL1.CCKD ro sf=q:/zVM-6.4/shadow/640rl1_1 #cu=3990
1002 3390 Q:/zVM-6.4/M01RES.CCKD ro sf=q:/zVM-6.4/shadow/m01res_1 #cu=3990
1003 3390 Q:/zVM-6.4/M01S01.CCKD ro sf=q:/zVM-6.4/shadow/m01s01_1 #cu=3990
1004 3390 Q:/zVM-6.4/M01P01.CCKD ro sf=q:/zVM-6.4/shadow/m01p01_1 #cu=3990
1005 3390 Q:/zVM-6.4/M01W01.CCKD ro sf=q:/zVM-6.4/shadow/m01w01_1 #cu=3990
1006 3390 Q:/zVM-6.4/M01W02.CCKD cu=3990

# cu=3990-3 gives error with shadow files #

# TAPE Devices
# 0580 3480 /home/dave/Desktop/VMESA24/sdiskadd.580
# 0580 3480 /z/VMESA24/VMPPNSS.580

# 0590 3590 C:/hercules/dasd/zvm53/HERCULES.000000.comp.het
# chunksize=4096 compress=1 method=1 level=4 maxsizeM=170
# eotmargin=131072

# CTC Adapters

# 0E20,0E21 CTCI 192.168.128.201 192.168.128.120
#044A LCS -n /dev/net/tun 192.168.128.200
#044B LCS -n /dev/net/tun 192.168.128.200

__________________________________________________________

Best regards

Paul
somitcw@yahoo.com [hercules-390]
2017-06-01 18:42:49 UTC
Permalink
Post by ***@alce1.tuttopmi.it [hercules-390]
Hi,
I can IPL z/VM 6.4 with Hercules 3.09 - 3.11 - 3.12 (Windows XP)
Not tested with Hercules 3.10 but I bet it will be OK :)
With Hyperion (version 8213)I get a PRG004 after the first
messages on the console
- - - remainder snipped - - -

Are you saying that when you comment out the definitions for
Hyperion and uncomment the definitions for Hercules 3.12 that
Hyperion gets a PIC 4 but Hercules 3.10 to 3.12 works.

Isn't that how it should work?
crc@alce1.tuttopmi.it [hercules-390]
2017-06-01 22:39:17 UTC
Permalink
Sorry I couldn't explain me better :-)

config #1 for Hercules 3.09-3.11-3.12 :
__________________________________________________
# definitions for Hercules 3.12 or Hercules 4.0 (Hyperion)

# definitions for Hercules 3.12
ARCHMODE Z/ARCH # Architecture mode


# definitions for Hyperion
# ARCHLVL z/Arch
# ARCHLVL ENABLE STFL_EXTENDED
# ARCHLVL ENABLE ASN_LX_REUSE
# ARCHLVL ENABLE bit44
________________________________________________


config #2 for Hercules 4.0 Hyperion :
__________________________________________________
# definitions for Hercules 3.12 or Hercules 4.0 (Hyperion)

# definitions for Hercules 3.12
# ARCHMODE Z/ARCH # Architecture mode


# definitions for Hyperion
ARCHLVL z/Arch
ARCHLVL ENABLE STFL_EXTENDED
ARCHLVL ENABLE ASN_LX_REUSE
ARCHLVL ENABLE bit44
________________________________________________

With config #1 and Hercules 3.09-3.10-3.12 IPL is OK

With config #2 and Hercules 4.0 Hyperion 8213 I get PRG004

Best regards

Paul
nabil.mahfouz@yahoo.com [hercules-390]
2017-06-02 15:36:19 UTC
Permalink
Hello,
Try parameter PAGING63 on stand-alone program loader (SAPL).
Best regards
crc@alce1.tuttopmi.it [hercules-390]
2017-06-03 09:54:14 UTC
Permalink
Hello

I can confirm that parameter PAGING63 is required.

I tried to cancel PAGING63 in my SALIPL screen and I got the very same error found by Franz Josef ( DASD 1002 AN OPERATION WAS TERMINATED BECAUSE A COMMAND REJECT ERROR OCCURRED )

Not sure if it's Hercules related (the parameter seems to be required also in zPDT sytems and I have no access to real Z systems)

Best regards

Paul
Franz Josef Pohlen fjpohlen-maillist@gmx.de [hercules-390]
2017-06-03 15:14:07 UTC
Permalink
Thanks to all, paging63 works. It disables High Performance Ficon that
is not supported by Hercules.
--
kind regards
Franz Josef Pohlen
Post by ***@alce1.tuttopmi.it [hercules-390]
Hello
I can confirm that parameter PAGING63 is required.
I tried to cancel PAGING63 in my SALIPL screen and I got the very same
error found by Franz Josef ( DASD 1002 AN OPERATION WAS TERMINATED
BECAUSE A COMMAND REJECT ERROR OCCURRED )
Not sure if it's Hercules related (the parameter seems to be required
also in zPDT sytems and I have no access to real Z systems)
Best regards
Paul
Aaron Finerman arfinerman@gmail.com [hercules-390]
2017-04-21 15:45:23 UTC
Permalink
Hi, This is related to Transport Mode I/O (ORB Byte 5, Bit x'04'). CCW
X'E7' is the 'Prefix' command and valid for ECKD in Command mode.
Best regards,
Entirely possible. Could be implying a level of functionality not
available with Hercules. How to get the OS to do something else is way
beyond my personal knowledge. Perhaps a CU model number as opposed to
omitting it might help or a change to the CU type. Just speculation.
The documentation I have that does not have this command is for storage
servers 2105 models E10, E20, F10 and F20. If you could get the OS to
think the DASD is on one of these control units, it might change the
behavior.
In the CCW trace, the volume label was successfully read. So, it is
possible that there is something in the volume label that is also
causing the behavior. I personally think that is a stretch, but it is
possible.
The trace does not contain the IPL commands, so it would seem that the
trace was started after the IPL. So it is possible that the contents of
SENSE ID (device and CU type and model numbers) or READ DEVICE
CHARACTERISTICS (neither in the trace) is leading to the unsupported
commands.
Harold Grovesteen
On Fri, 2017-04-21 at 16:19 +0200, Franz Josef Pohlen
Post by Franz Josef Pohlen fjpohlen-***@gmx.de [hercules-390]
I have just seen this VM message in the log after the command reject.
HCPERP6301I CHANNEL COMMAND WORD COMMAND CODE = N/A HPF
I wonder if the word HPF may point to a check of zVM if High Perfomance
Ficon is available and Hercules doesn't react on this as expected.
Post by Franz Josef Pohlen fjpohlen-***@gmx.de [hercules-390]
Am 21.04.2017 um 14:35 schrieb Franz Josef Pohlen
Post by Franz Josef Pohlen fjpohlen-***@gmx.de [hercules-390]
Hello all,
as the Hercules 4.0 doesn't seem to be working for the current zvm. I
will try to get the zvm 6.4 running with Hercules 3.12 (Win 64Bit). I
get an error during IPL after I have confirmed the time question. It
cancels with command reject on the IPL device. For documentation I have
started a ccw trace on the ipl device and ipled the zvm 6.4 with
cons=sysc. So the zVM messages and the ccw trace is in the log. I hope
that someone of you developers can see there what's going wrong. My old
zvm 6.3 starts without problems on this hercules configuration. I have
also attached my hercules config. There might still be some settings
for
Post by Franz Josef Pohlen fjpohlen-***@gmx.de [hercules-390]
Post by Franz Josef Pohlen fjpohlen-***@gmx.de [hercules-390]
Hercules 4.0 but they were ignored during start with Hercules 3.12.
Thanks in advance for your help and have a nice weekend
Franz Josef
Hercules Config
1206 3390 E:/daten/ipl390/dasd/640res.zvm cu=3990
sf=E:/daten/ipl390/dasd/640res_1.zvm
Harold Grovesteen h.grovsteen@tx.rr.com [hercules-390]
2017-04-21 14:33:00 UTC
Permalink
There is no work around in Hercules for an unsupported CCW command (E7).

Can the command be implemented? Depends upon whether documentation of
the command can be found and what it does and what it would take to
emulate it.

I personally have no documentation about this command. Someone else
might. This information is getting harder and harder to fine as time
goes on. My most recent documentation is from 2000. This command is
not documented there.

Can you get the operating system to _not_ issue the command? There
might be a way to do that. Purely speculation on my part. It would
have to be through the device type, CU type or some OS configuration
somewhere. I would not want to muck about with those without a backup
of the original volume.

Harold Grovesteen


On Fri, 2017-04-21 at 14:35 +0200, Franz Josef Pohlen
Post by Franz Josef Pohlen fjpohlen-***@gmx.de [hercules-390]
Hello all,
as the Hercules 4.0 doesn't seem to be working for the current zvm. I
will try to get the zvm 6.4 running with Hercules 3.12 (Win 64Bit). I
get an error during IPL after I have confirmed the time question. It
cancels with command reject on the IPL device. For documentation I have
started a ccw trace on the ipl device and ipled the zvm 6.4 with
cons=sysc. So the zVM messages and the ccw trace is in the log. I hope
that someone of you developers can see there what's going wrong. My old
zvm 6.3 starts without problems on this hercules configuration. I have
also attached my hercules config. There might still be some settings for
Hercules 4.0 but they were ignored during start with Hercules 3.12.
Thanks in advance for your help and have a nice weekend
Franz Josef
13:49:24 1206:start i/o file[0] bufcur 0 cache[207]
13:49:24 1206:synchronous I/O ccw addr 1fddd000
13:49:24 HHCCP048I 1206:CCW=E7400040 1FDDDF50=>01800000 00000000
00000000 40C01000 ............ {..
13:49:24 HHCCP075I 1206:Stat=0E40 Count=0040
13:49:24 HHCCP076I 1206:Sense=80000000 00FFFF01 00000000 00000000
00000000 00000000
13:49:24 HHCCP077I 1206:Sense=CMDREJ
13:49:24 1206:end i/o bufcur 0 cache[207] waiters 0
13:49:24 HHCCP050I 1206:SCSW=00C24017 Stat=0E40 Count=0040 CCW=1FDDD008
13:49:24 08:49:24
13:49:24 1206:start i/o file[0] bufcur 0 cache[207]
13:49:24 1206:synchronous I/O ccw addr 3fd3c000
13:49:24 HHCCP048I 1206:CCW=E7400040 3FD3CF50=>01800000 00000000
00000000 40C01000 ............ {..
13:49:24 HHCCP075I 1206:Stat=0E40 Count=0040
13:49:24 HHCCP076I 1206:Sense=80000000 00FFFF01 00000000 00000000
00000000 00000000
13:49:24 HHCCP077I 1206:Sense=CMDREJ
13:49:24 1206:end i/o bufcur 0 cache[207] waiters 0
13:49:24 HHCCP050I 1206:SCSW=00C24017 Stat=0E40 Count=0040 CCW=3FD3C008
will_fashion@yahoo.fr [hercules-390]
2017-06-06 11:00:40 UTC
Permalink
hi all,

i confirm the PAGING63 parameter resolve the problem.


thanks
'Norman Hollander on Desertwiz' norman.hollander@desertwiz.biz [hercules-390]
2017-06-06 16:53:21 UTC
Permalink
I haven’t been following this thread. I didn’t know about PAGING63.

What was the problem, and why did this fix it? Where was this parm

defined?

Thanks.

zNorman



From: hercules-***@yahoogroups.com [mailto:hercules-***@yahoogroups.com]
Sent: Tuesday, June 6, 2017 4:01 AM
To: hercules-***@yahoogroups.com
Subject: [hercules-390] Re: zVM 6.4 on Hercules 3.12 does not start





hi all,



i confirm the PAGING63 parameter resolve the problem.



thanks

Continue reading on narkive:
Loading...